kaelc
Crew Member
They have a good rep but that's an old engine. Things like a trim pump can cost more than an old engine is worth often, and any engine can go booM after that long
Boats on Used Victoria and Other Areas
- Thread starter kingblazer84
- Start date
Loghauler
Well-Known Member
Don’t know don’t care might be a fine engine why take a chance
For the price easy enough to change it out
Aces
Well-Known Member
I had 3200 hours on my last set of “optipops” when I re powered…lol
kaelc
Crew Member
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
kaelc
Crew Member
Lots of the Parker Poland 660 for sale should be able to get one for 100k. Not sure if the CETA free trade agreement eliminated the 9.5% Duty or not?
www.facebook.com
www.facebook.com
www.facebook.com
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
2023 Parker Poland 660 Weekend - Skamander
Introducing the Parker Poland 660 Weekend, also known as Skamander in the USA, your premier European boat designed for family adventures! This renowned model, celebrated in over 33 countries, is now...
www.facebook.com
kaelc
Crew Member
UFO unidentified floating object 24 foot aluminum with a 150hp Honda outboard with a cabin. "Reasonable Offers considered; low ballers will be responded to accordingly." I'm not sure with the amount of information included the seller should have such a high bar. https://www.facebook.com/share/1EJTSgySxs/
kaelc
Crew Member
Nice looking 18 foot 2006 silverstreak hull and trailer, with some older motors. At 45k I'm not sure I agree " to many options to list." https://www.facebook.com/share/19TfcMCGa3/
kaelc
Crew Member
anyone go check out this 18 foot aluminum for 30K? 2012 Smokercraft Phantom Welded Aluminum Boat https://www.facebook.com/share/1AmjNxG7mZ/
kaelc
Crew Member
Good looking deal. Lots of details. If it checks out should sell in days https://www.facebook.com/share/15Yggbas3A/?mibextid=79PoIi
19.5 Welded Aluminum Center Console with Trailer
1999 Riverhawk Marine welded aluminum center console, 22.5 LOA, hull is in great condition no damage.
Dialed and ready to go - Bimini top, swivel front bucket and 2 bench seats - this boat feels quite big for its size and easy to move around on. Easy to trailer and launch as well.
2014 Mercury 150 XL with 208 hours, all services complete, stainless prop, runs like new.
Yamaha 9.9 kicker with full console controls - reliable, unknown hours, full service just completed
Simrad NSS chart plotter
Anchoring system
Raised welded aluminum platforms for riggers with rod holders with Scotty swivel/tilt bases and wired for Scotty both sides, ample rocket launcher racks on structure
Boat has undergone a refit at the end of 2023
New batteries (2022)
New bottom paint
New upper paint
New Bennet trim tabs
New LED navigation lights
New auto bilge
New fore and aft flood lighting
New bus bars
New compass
New solar trickle chargers
New low voltage charging station on dash
Trailer: Galvanized Tricker Trailer with folding tongue for compact storage
Upgraded end of 2023:
All new LED lighting
New alloy wheels and tires
New winch
New HD tongue jack
LOCATED ON THE SUNSHINE COAST
Viewings must be scheduled Fri-Mon
Boat is currently on the hard
19.5 Welded Aluminum Center Console with Trailer
1999 Riverhawk Marine welded aluminum center console, 22.5 LOA, hull is in great condition no damage.
Dialed and ready to go - Bimini top, swivel front bucket and 2 bench seats - this boat feels quite big for its size and easy to move around on. Easy to trailer and launch as well.
2014 Mercury 150 XL with 208 hours, all services complete, stainless prop, runs like new.
Yamaha 9.9 kicker with full console controls - reliable, unknown hours, full service just completed
Simrad NSS chart plotter
Anchoring system
Raised welded aluminum platforms for riggers with rod holders with Scotty swivel/tilt bases and wired for Scotty both sides, ample rocket launcher racks on structure
Boat has undergone a refit at the end of 2023
New batteries (2022)
New bottom paint
New upper paint
New Bennet trim tabs
New LED navigation lights
New auto bilge
New fore and aft flood lighting
New bus bars
New compass
New solar trickle chargers
New low voltage charging station on dash
Trailer: Galvanized Tricker Trailer with folding tongue for compact storage
Upgraded end of 2023:
All new LED lighting
New alloy wheels and tires
New winch
New HD tongue jack
LOCATED ON THE SUNSHINE COAST
Viewings must be scheduled Fri-Mon
Boat is currently on the hard
Stizzla
Crew Member
When “cushioned seats” are an option they listed I’m not sure how many are left…
So motors probably worth 8 grand.. trailer 2.... how much does that hull weigh, and what's current aluminum scrap value, add those numbers up and you get fair market value... that or find some clueless surveyor to value it stupid high and insure it so you can win when it eventually sinks at the dock... hope it's not a members boat, but ever members boat that's been a riverhawk/rh has ended up ending with pictures of it under water....
brutus
Well-Known Member
Member or not it’s a fact
MiddlepointBight
Well-Known Member
I personally have not had a good experience with HPDIs. Purchsed a 20'3 Hourston with a 2001 Yamaha 175hp HPDI that had 200h on a rebuild. Cylinder blew about 11 hours later. Motor was really loud, and really thirsty.
Note that my sample size is 1, so you might get some good life out of her yet - just wasn't my luck.
kaelc
Crew Member
Bay liner discovery 26 foot hard top 65k with a nice looking trailer and kicker https://www.facebook.com/share/1297MRgwoAb/?mibextid=79PoIi
Corey_lax
Crew Member
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
Loghauler
Well-Known Member
If it only needed a motor famous last words
Add trailer and a major refit, wiring, tank and fuel lines, kicker, electronics through hulls re and re and If no rot found plus canvas and cushions
Pricey little project
And burn up a bunch of time at $
when you need a trailer to put your trailer on to haul your boat I’ll think not
Then again what do I know just a land lubber
Add trailer and a major refit, wiring, tank and fuel lines, kicker, electronics through hulls re and re and If no rot found plus canvas and cushions
Pricey little project
And burn up a bunch of time at $
when you need a trailer to put your trailer on to haul your boat I’ll think not
Then again what do I know just a land lubber
Jamesonm
Active Member
What link are you referring to?
kaelc
Crew Member
Tight quarters with 5 on the boat today and 10 traps, how I yearn for a 10 foot beam. This looks like pretty good value.
www.facebook.com
2018 CUTWATER C302 Coupe 310k cad
trailer available.
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
trailer available.
Similar threads
