Boats on Used Victoria and Other Areas

tigerprawn said:
2023 Northwest Aluminum 22’ Centre Console with pod

22’ x8.5 beam ,
200hp Suzuki fly by wire
18 hours
9.9 Suzuki fuel injected kicker, with hour meter (60hours)
Freshwater wash down w 120 litre water pladder ,
Bennett sport trim tabs ,
Lowrance carbon 9 with NMEA 2000 gps/ heading sensor,
Standard Horizons VHF radio,
Dual Batteries with 3 way switch and night switch,
90 gallon fuel tank
3 rigger mounts 2 riggers
LED Deck lights
Cover for CC dash
USB power plugin
Horn
Fish box
Upholstery for bench seats
Auto bilge with secondary manual pump (DOT)
Clear coated hull
Foamed Floatation hull
2022 Venture Aluminum trailer with disc brakes and torsion axles plus spare tire and side guides

This is a perfect walk around for cut plugging ,trolling safe and solid boat.
These boat are built for lodge toughness
Turn key 🔑 ready
Click to expand...
I like this. Might come take a look if I'm over there sooner than later.
 
tigerprawn said:
2023 Northwest Aluminum 22’ Centre Console with pod

22’ x8.5 beam ,
200hp Suzuki fly by wire
18 hours
9.9 Suzuki fuel injected kicker, with hour meter (60hours)
Freshwater wash down w 120 litre water pladder ,
Bennett sport trim tabs ,
Lowrance carbon 9 with NMEA 2000 gps/ heading sensor,
Standard Horizons VHF radio,
Dual Batteries with 3 way switch and night switch,
90 gallon fuel tank
3 rigger mounts 2 riggers
LED Deck lights
Cover for CC dash
USB power plugin
Horn
Fish box
Upholstery for bench seats
Auto bilge with secondary manual pump (DOT)
Clear coated hull
Foamed Floatation hull
2022 Venture Aluminum trailer with disc brakes and torsion axles plus spare tire and side guides

This is a perfect walk around for cut plugging ,trolling safe and solid boat.
These boat are built for lodge toughness
Turn key 🔑 ready
Click to expand...
Sweet boat, well built also
 
tigerprawn said:
2023 Northwest Aluminum 22’ Centre Console with pod

22’ x8.5 beam ,
200hp Suzuki fly by wire
18 hours
9.9 Suzuki fuel injected kicker, with hour meter (60hours)
Click to expand...

I’ve fished on this tin boat and can say it is top quality all around. The hull is massive and handles the water well and It catches fish too.

We limited out on springs in the first hour out, but that might have been because we had Blue Wolf sausage rolls with us.
 
Pineapple Express said:
The proportions of that hull seem off to me. The hull sides are quite tapered from the gunnels inward to being much narrower at the waterline, and even narrower at the chine....thinking it might be quite tender as weight shifts side to side, and rolly in a beam sea.
Click to expand...
And your almost sitting in the bow, probably not the best ride heading into the waves either
 
Pineapple Express said:
The proportions of that hull seem off to me. The hull sides are quite tapered from the gunnels inward to being much narrower at the waterline, and even narrower at the chine....thinking it might be quite tender as weight shifts side to side, and rolly in a beam sea.
Click to expand...
Boultons are always a little cheaper on the resale market it seems. Anyone been out on one of the bigger ones? If this one had a rear steering station and a better trailer it would be a steal. As is seems priced ok, nice engines just a pain to fish as is.
 
kaelc said:
Boultons are always a little cheaper on the resale market it seems. Anyone been out on one of the bigger ones? If this one had a rear steering station and a better trailer it would be a steal. As is seems priced ok, nice engines just a pain to fish as is.
Click to expand...
Ask and we shall deliver lol… 2008 in Alaska with rear station and Honda 225 (half the hours) currently, doesn’t make the one at Harrison look to bad price wise.
I too am curious about ride as hadn’t noticed the tapered sides initially.

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com www.facebook.com
 

Attachments

  • IMG_8716.png
    IMG_8716.png
    746.3 KB · Views: 67
kaelc said:
Boultons are always a little cheaper on the resale market it seems. Anyone been out on one of the bigger ones? If this one had a rear steering station and a better trailer it would be a steal. As is seems priced ok, nice engines just a pain to fish as is.
Click to expand...
Yikes, almost non-existent reverse chine, actual hull area is quite narrow. Looks like they welded one inch L angle at the chine instead of doing a reverse. This might be a tippy boat.
 
Last edited:

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com
So much boat under $50k!!!
G2 with mixed reviews tho
 

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com www.facebook.com
Are these boats self bailing ?
Looks like a nice candidate for a pod when the inboard acts up
Wonder if hull is composite stringers
Seems like a lot of boat for 23 g
 
You must log in or register to reply here.

Similar threads

A
Help with buying my first boat
Replies
237
Views
21K
1marko
1
smokedvw
Determining my next boat and looking for help (17' DE/Hurston, 185 DE, Campion 542, Hewes Sea Runner 180 etc)
Replies
17
Views
6K
Aces
Aces
Franko Manini
SOLD: 20' ThunderJet Luxor Welded Aluminum
Replies
5
Views
4K
Franko Manini
Franko Manini
bMcN
Double Eagle 185 for sale on UsedVic
Replies
6
Views
3K
halimark
H
ExFlyGuy
Pod builder on the island
Replies
14
Views
5K
Fishing?
F
Back
Top