Boats on Used Victoria and Other Areas
- Thread starter kingblazer84
- Start date
Stizzla
Crew Member
Seems like a great deal as that motor and trailer alone must’ve cost close to the asking price1974 Reinell / Kal-Kustom RV2270 Extended - Polly Wog - $39,500
Not familiar with this boat, but newish power and looks to be re-done
View attachment 114800
1974 Reinell / Kal-Kustom RV2270 Extended - Polly Wog - boats - by dealer - craigslist
Polly Wog retains the classic lines of a mid-70's Reinell RV2270 while being completely modernized for 2022. This six-year rebuild includes a new 3 inch transom, longitudinal stringers, a hardtop,...nanaimo.craigslist.org
Weatherall
Active Member
That's what I thought.
Weatherall
Active Member
You know what they say about a free boat! LOL That bracket for $5k is probably 1000 less than they normally cost.
kaelc
Crew Member
Looks like the trailer is missing electric over hydraulic brakes? Nice engines but there is a Campion from 2000 with wither 200hp and 9.9hp Suzukis that have been sitting for months at 43k. I thought that was a good deal but hasn’t moved
Captain PartyMarty
Crew Member
That bracket is 10k USD, just had one priced from PDR
Weatherall
Active Member
Oh wow, that’s a lot more than I paid last winter. Mine was $6k USD for a single engine unit, plus kicker. Maybe prices have gone way up, or it that for twins? They are very nice units.
Weatherall
Active Member
Ya, not much moving these days.
kaelc
Crew Member
Doesn’t stop dealers and sellers asking too much!
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
2007 hewescraft searunner for 47k. I sold mine for 27k almost equipped exactly the same but with no electronics.
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
kaelc
Crew Member
Worst ad alert. 1 picture, no hp, dimensions or…. 1999 Armstrong Pilot House 200k cad https://www.facebook.com/share/1E7QAPZ3e1/?mibextid=wwXIfr
Great example of the quality of Armstrong built boats. All set to go fishing or cruising. Low hour Yanmar engine and only 10 hours on the Bravo 3 leg. New (July 2024) Yamaha kicker. New battery just put in (2024), risor and turbo done few hours ago. Safety and quality together.
Great example of the quality of Armstrong built boats. All set to go fishing or cruising. Low hour Yanmar engine and only 10 hours on the Bravo 3 leg. New (July 2024) Yamaha kicker. New battery just put in (2024), risor and turbo done few hours ago. Safety and quality together.
kingblazer84
Crew Member
1998 19 ft Arima sea Ranger - boats - by owner - marine sale - craigslist
1999 sea Ranger Hard top with 2018 115 HP meciry
Rayvon
Well-Known Member
The owner spent way too much on one of the cheapest,poorly built hulls ever produced,Reinell.
noluck
Well-Known Member
i thought the same thing
I don't know how they get away with charging so much... a 4x8 sheet of 1/4 inch aluminum weighs.. what...120lbs? I haven't priced aluminum out in a while.. but even at 5 bucks a pound... seems crazy high.
InterMechanico
Well-Known Member
Well I think it’s quite obvious that they decant “pure essence of quality” into the bracket as they build it. Those in the know can confirm that Pure Essence of Quality can only be decanted between 1:00pm and 1:30pm, weekdays only, so they have to work within this tight time frame, hence the $$$$$$
RiverBoy
Well-Known Member
are they really? that’s not good. my uncle about to buy a reinell WA with an inboard 4.3. LOA is approx 23’ seems grossly underpowered to boot? it’s a 2006 in vintage
kaelc
Crew Member
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com
Rayvon
Well-Known Member
I'm sure at some point Reinell was taken over by new owners ,so a 2006 model may be totally different than the 70's junk. I don't know why anyone would take over a brand with such a terrible reputation though.
Any of the local plate boat builders could do it in their sleep.lots of local fabricators would appreciate that work right now and can easily match or exceed pdrs quality shop local if you can
Similar threads
