Lotta buck for the bang right there22’ Ironwood boat $125,000
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.www.facebook.com
View attachment 110808View attachment 110809
Well said
Some times the pretty ones are like that
www.facebook.com
www.facebook.com
www.facebook.com
www.facebook.com
www.facebook.com
China build....Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
Seems like a nice wide beam and even enough power for the @Stizzla
2023 Alaska 275
Specifications
Length OA (ft) 29.592
Length WL (ft) 24.118
Beam OA (ft) 9.969
Beam WL (ft) 8.869
Depth (ft) 5.267
Draft (ft) 1.339
Freeboard (ft) 3.928
Deadrise: 17 Degrees.
Hull type: 1/4 Aluminum Hull
Engine
- New Twin Suzuki Suzuki DF300APX5 Outboard 300 HP under 5 year warranty.
- Less than 40 hours.
- 150 Gal gas tank
Electronics
- Garmin 8612xsv display
- Garmin Fantom X 18 Radar
- SS175HW Transducer
- Garmin VHF115
- Garmin GPS Antenna (External)
- VHF Antenna
- Garmin Tank Level Sensors w/ Interface Cables
- Fusion RA670 Stereo Fusion Speakers NMEA 2000 Kit
- Two 20” LED light bar
- Fresh water pump
- Bilge pump
- Windlass anchor
Kitchenette
- Generous 52” x 30” x 1.5” Butchers Block countertop
- Wallace Nordic diesel-powered heater/stove with 10Gal diesel tank.
- Coolmatic CRX 110 Refrigerator/Freezer 110v/12v, 3.9 cubic feet
- Stainless steel collapsible sink with fresh water
- Large storage space below
Head
- Comfortable head enclosure with privacy curtains and lighting.
- Vacu Flush Head - Vacuum Generator / Tank 6.5 Gallon 20" H x 12" W x 30" L
Interior Features
- EVA Foam flooring Teak Light grey
- Marine-grade carpet (Black) on side walls and ceiling panels
- Revealed LED lighting strips at the passage ally
- Puck ceiling lights, red/white/blue
- Butcherblock 30” x 42” x 1.5” dinette with adjustable pedestal
- Twin bench seats at the dinette
- All upholstery black vinyl leather with 4” Foam construction.
- Recessed storage nooks inside walls
- Storage below bench seats
- Section V-Berth with Large storage compartments below
- USB power outlets on the port and starboard
- Drink holders throughout
- Lower the adjustable dinette table and place the bench seat backrest cushion to make a second sleeping area.
- Adjustable captain’s chair with suspension
- Two window openings for cross breeze.
AFT Deck Features
- Rear helm
- EVA Foam flooring
- Three fish storage boxes below deck or one could be converted to live bait well
- Four side storage compartments for equipment.
- Eyes on access hatch to below deck.
- Large bolt-on service hatch for all components below deck
- Fresh water access for wash down or shower attachment
- Additional wash-down pump with a 6’ intake hose to collect salt water or remove water from fish tanks.
- Two service hatches at the transom for the battery bank, main power switch, and fuel filters.
-Four flush-mount stainless steel rod holders at gunnels
-Roof mount rod holder
-AFT deck lighting
- Full-width swim deck
- Stainless steel cleats
Fore Deck
- 1.5” Diameter aluminum railing
- Anti Slip grip tap (Black)
- Cleats
- Windlass anchor
Trailer
- Manufacturer: Tuff trailer 2010
- New tires
- Steel construction
- Tripple axle
- Color: Black
https://www.boattrader.com/boat/2023-alaska-275-8946054/
Call or text [hidden information]
Can Facilitate delivery.
www.facebook.com
www.facebook.com
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
Seems like a nice wide beam and even enough power for the @Stizzla
2023 Alaska 275
metalboatkits.com
Yeah my thoughts exactly. Most of the Chinese builds have a narrow build to fit in a container. If they are over 8 feet they have to go on the top deck for much more $$$ in shipping cost.But is it? The plans are from this site:
Alaska 275 - Cabin Cruiser Kit - MetalBoatKits
Build it from a kit! This welded aluminum 27 foot boat will take you almost anywhere. A family cabin cruiser, weekend fishing trips..
The ad doesn't say who welded it or where, but I don't think that the Chinese factories are buying plans like this...are they?
You're 100% right about the beam. Guess I'm wrong. Design looks bit odd and the welds don't look great at a glance.But is it? The plans are from this site:
Alaska 275 - Cabin Cruiser Kit - MetalBoatKits
Build it from a kit! This welded aluminum 27 foot boat will take you almost anywhere. A family cabin cruiser, weekend fishing trips..
The ad doesn't say who welded it or where, but I don't think that the Chinese factories are buying plans like this...are they?
Or buy the mothership that these boats belong to… $289,000Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
Fat cats..... Old lodge boats
www.facebook.com
www.facebook.com
Confusing, as as it has 2 model indications. 2052 was the stern drive model, that is an original outboard version (not podded) so it would be a 2002 model. (coincidentally it could also be the year))Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
2002 21' 2052WA Trophy @ $28.5k w/2015 150hp Suzi (85 hours)
View attachment 110903
85 hours must be a rebuild?
Looks like it’s been a dingy or island hopper for a larger vessel/yacht. Has the RVYC tag right above the swim platform. It could be a 2015 with only 85 hours which isn’t necessarily a good thing for a 9 y/o outboard.
