scott craven
Well-Known Member
That's a long way to haul a boat !
Boats on Used Victoria and Other Areas
- Thread starter kingblazer84
- Start date
kaelc
Crew Member
Yeah, but a trolling motor and new suzuki 250 will cost 55k up here and the weather is just changing!
Aquaholic
Crew Member
I see one of your future business models. These guys are doing it on the east coast:
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
kaelc
Crew Member
I see one of your future business models. These guys are doing it on the east coast:
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
I'd spend too much time fishing down there. Tough business the two who currently do it in BC get so many bad reviews/lawsuits as every old boat is like a box of rotten chocolates, you never know what you are going to get.
Aquaholic
Crew Member
Do they pre-sell them or import and then sell?
kaelc
Crew Member
Import/fixup/sell. Norm in van and Pearson in Sooke. Probably presell?
I should start a boat buying YouTube channel, funner than doing the hard work.
https://www.facebook.com/share/1JSbswXJHf/?mibextid=wwXIfr 1974 Custom downeast style boat 50k in Sidney w a little outboard
Jegermiester
Active Member
Best line in the video clip:I see one of your future business models. These guys are doing it on the east coast:
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
She's gonna be an awful beauty when I'm done with her!!
And that Newfie accent makes it all that much better
Oakbayfishin
Member
15’6 Hourston Glasscraft
15’6” Hourston Glasscraft 70Hp Yamaha 2 stroke main 8 Hp Yamaha 4 stroke kicker -VHF radio -Stereo with Kenwood marine speakers -Wired for Scotty downriggers -Big beefy aluminum Downrigger mounting brackets bolted to the boat. -Bilge pump with float switch and manual switch -2 fairly new...
www.usedvictoria.com
15’6 hourston $6000
Pineapple Express
Well-Known Member
Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
www.usedvictoria.com
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
www.usedvictoria.com
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
Aquaholic
Crew Member
Well, I certainly screwed that comment up. I didn’t see it clear enough, but I still made a comment.Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
View attachment 121784
kaelc
Crew Member
55k price drop on 315k 30 duckworth. Seakeeper included in usd https://www.facebook.com/share/17DwZquFcN/?mibextid=wwXIfr
kaelc
Crew Member
Price drop on a 97 GW 272 with newer mercs. 65k usd in WA. Still a little high https://www.facebook.com/share/1CYZcowVVC/?mibextid=wwXIfr
Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
That looks to be a good deal if everything checks out. Won’t last long.Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
View attachment 121784
Aquaholic
Crew Member
Boat moorage lift. 26-38’.
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
salmonkiller01
Well-Known Member
Wonder what the asking price is
kaelc
Crew Member
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
kaelc
Crew Member
Loaded 2022 Stabicraft UCWT 2250 including flir. I forget how much a 22 aluminum costs these days new? Maybe it's time for dealers and manufactures to start publishing prices or AI will do it for them.
The price for a new Stabicraft 2250 UCWT (Ultracab Walk Thru) varies by model year and specific configuration, with a 2023 model having an MSRP of around
$283,661
and a 2024 model listed at approximately
$276,588
, not including freight. On the used market, prices can start around
$122,497
.
The price for a new Stabicraft 2250 UCWT (Ultracab Walk Thru) varies by model year and specific configuration, with a 2023 model having an MSRP of around
$283,661
and a 2024 model listed at approximately
$276,588
, not including freight. On the used market, prices can start around
$122,497
.
- 2023 Stabicraft 2250 Ultracab Walk Thru Offshore: Approximately
$283,661
MSRP (excluding freight).
- 2024 Stabicraft 2250 Ultracab Walk Thru Offshore: Approximately
$276,588
MSRP.
- Used market: Listings for a 2022 or 2024 models can start around
$122,497
to
$124,995
.
- Note: Prices are subject to change based on options, dealer, and region. The prices above do not include potential fees like freight or sales tax.
kaelc
Crew Member
Price drop hewescraft Alaskan 250 2020 for 125k usd https://www.facebook.com/share/1YtJuRFW3o/?mibextid=wwXIfr
kaelc
Crew Member
https://www.facebook.com/share/17C7mBoQZc/?mibextid=wwXIfr 27 skagit orca price drop to 99k usd
Similar threads
