www.facebook.com
www.facebook.com
Looks like someone liked it! Sold. New electronics is nice.Price may be a bit steep ($89) but I like the looks of this 2006 seawest discover 692 - 22’ with twin 115 yams. From what I can see pretty similar to the seasport 2200? I think 24’ would be ideal but the layout looks good for the size.
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
www.facebook.com
www.facebook.com
Yeah, but a trolling motor and new suzuki 250 will cost 55k up here and the weather is just changing!
I see one of your future business models. These guys are doing it on the east coast:
www.facebook.com
I see one of your future business models. These guys are doing it on the east coast:
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
I'd spend too much time fishing down there. Tough business the two who currently do it in BC get so many bad reviews/lawsuits as every old boat is like a box of rotten chocolates, you never know what you are going to get.
Do they pre-sell them or import and then sell?
Import/fixup/sell. Norm in van and Pearson in Sooke. Probably presell?
Best line in the video clip:I see one of your future business models. These guys are doing it on the east coast:
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.usedvictoria.com
www.usedvictoria.com
Well, I certainly screwed that comment up. I didn’t see it clear enough, but I still made a comment.Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
View attachment 121784
Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
That looks to be a good deal if everything checks out. Won’t last long.Pretty clean looking Malibu 186 with pod and 2013 Yamaha F150 for $24,500.
Malibu 185
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft. Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high...
18ft Malibu 185 podded with custom aluminum pod from DSS welding. LOA is 22ft.Powered by a 2013 Yamaha 150 with 385 hours that i purchased new for the conversion. Stainless 19p prop. Very reliable and fuel efficient. Cruises at 29mph @ 3400 rpm. Max speed is 48mph. Kicker is a 2000 8hp high thrust manual tilt with tiller. Has seastar hydraulic steering and bar to connect to kicker. Boat also has Bennett hydraulic trim tabs.Electronics include a Simrad NSS8 chart plotter and a Standard Horizon VHF with AIS receiver that overlays onto the chart. Transducer is a airimar P66 with speed sensor wheel.2 new interstate batteries in summer of 2024 (1 deep cycle and 1 starting) connected to a battery switch with isolator to maintain starting battery. Boat is wired for Scotty electric downriggers.Replaced tires, brakes, bearings and springs on the trailer 2 years ago and doesn't have a lot of mileage on it since.Boat is in great shape and in turn key condition. I bought a bigger boat and this one now sadly has to go.
View attachment 121784
