Boats on Used Victoria and Other Areas

tbeatm said:

Facebook

www.facebook.com www.facebook.com

This one also seems optimistic, following it since I have the same boat, 2 years older. Already knocked down from 49k after a week.
Click to expand...
That looks super clean. You want to buy off an older fellow holding up his trout catch. Motors are new.
Worth negotiating for sure.

Edit... Just noticed the power is only 115. Assume this is under powered?
 
Last edited:
Bill 310 said:
Linky

Product

Product
www.aluminumboatdesigns.com


View attachment 118109




View attachment 118108
Click to expand...
36' displacement with twin outboards. 🤨 I wonder if this has ever been built as it seems a very strange and specialized plan. If it is true displacement you would have a hull speed of about 8 knots. Why would you do that with outboards and not twin diesel inboards? I bet at today's dollar you would be looking at at least 550K+ for a bare bones build.
 
Tomfoolery said:
36' displacement with twin outboards. 🤨 I wonder if this has ever been built as it seems a very strange and specialized plan. If it is true displacement you would have a hull speed of about 8 knots. Why would you do that with outboards and not twin diesel inboards? I bet at today's dollar you would be looking at at least 550K+ for a bare bones build.
Click to expand...
Yup it’s been built and for a lot cheaper. They have a YouTube channel. I thought it performed well if I remember correctly with small outboards. Ain’t no cat like our man down south but for a man with a tighter pocket book it would be a good long term cruiser.
 

Facebook

www.facebook.com www.facebook.com
Never seen one of these in person but it looks pretty dang sweet, especially if somebody has a couple of 200’s kicking around to toss on it.
 
Ron.C said:
Thoughts on this Wellcraft

https://www.facebook.com/marketplace/item/630746706702305/?ref=category_feed&referral_code=null&referral_story_type=post&tracking=browse_serp:1a3c9dcd-5104-4efb-b42a-d925c5515c95
Click to expand...
Nice power and trailer. Be interested to know if steering and electrical was redone at the same time. Got a model number better yet a link to the catalog from that year?

I’d start with questions like has the gas tank been replaced is it accessible to inspect.
 
Tomfoolery said:
You are welcome! An aluminum cat would be the bomb, but I would have to win the lottery to be able to afford one. It's been a number of years since I was in Bamfield, but I remember seeing an aluminum cat out there which was partly what inspired us to try a cat. There are a few larger ones around Nanaimo and I drool when I see that tunnel sitting a foot off the water. I always liked the Australian Kevlacat and would probably sell my left testicle to get into one of them if there was a dealer here. Their 3100 series with an Alaskan bulkhead would be almost the perfect west coast boat I think. https://kevlacat.com.au/model-range-8-2-metre-series-3100/ There are a few that come up in NA from time to time, mostly on the east coast. Like this one: https://www.boattrader.com/boat/2000-kevlacat-offshore-2400-9765912/
Click to expand...
Yeah, unlikely in this lifetime

What about the 26’ glacier bays? See a few around south of the border and pretty sure I fished on one outta renfrew about 15 years ago. I remember his auto pilot and twins being dialled. Bit too big for me but seemed nice / comparable to the tomcat?
 
the force said:
Yeah, unlikely in this lifetime

What about the 26’ glacier bays? See a few around south of the border and pretty sure I fished on one outta renfrew about 15 years ago. I remember his auto pilot and twins being dialled. Bit too big for me but seemed nice / comparable to the tomcat?
Click to expand...
That glacier bay is still guiding in Renfrew, he just finally ditch his etec for Merc this year
 
the force said:
Yeah, unlikely in this lifetime

What about the 26’ glacier bays? See a few around south of the border and pretty sure I fished on one outta renfrew about 15 years ago. I remember his auto pilot and twins being dialled. Bit too big for me but seemed nice / comparable to the tomcat?
Click to expand...
I looked at them when shopping got a Tomcat. The one I went on in Sidney only had a seating for 3, under the hard top in the cabin. I believe there are other configurations but they have a better walk around setup so a smaller cabin if my memory serves me. Great couples boat, I think. Harder for 4 people to travel comfortably was my recollection.
 
Tomfoolery said:
36' displacement with twin outboards. 🤨 I wonder if this has ever been built as it seems a very strange and specialized plan. If it is true displacement you would have a hull speed of about 8 knots. Why would you do that with outboards and not twin diesel inboards? I bet at today's dollar you would be looking at at least 550K+ for a bare bones build.
Click to expand...
Displacement cats can slice thru the water and are able to greatly exceed the normal hull speed of a monohull boat.

I have a friend in NZ that builds displacement and planing cats. Here is an example of a 9metre displacement cat with twin 80hp outboards that can cruise at 16knts.

Our boats - Kingfisher Boats

View our extensive range of aluminium minicats, power cats and monohulled boats. 3m to 18m alloy built catamarans and monohulled boats.
www.kingfisherboats.co.nz www.kingfisherboats.co.nz

Lots of interesting boat designs in NZ.
 

Attachments

  • IMG_1075.jpeg
    IMG_1075.jpeg
    271.5 KB · Views: 31
Last edited:
You must log in or register to reply here.

Similar threads

Chummer
On the hunt for a boat
Replies
96
Views
17K
Tommygun
Tommygun
aeroblade
Help with buying my first boat
Replies
237
Views
43K
1marko
1
smokedvw
Determining my next boat and looking for help (17' DE/Hurston, 185 DE, Campion 542, Hewes Sea Runner 180 etc)
Replies
17
Views
8K
Aces
Aces
Franko Manini
SOLD: 20' ThunderJet Luxor Welded Aluminum
Replies
5
Views
5K
Franko Manini
Franko Manini
ExFlyGuy
Pod builder on the island
Replies
14
Views
6K
Fishing?
F
Back
Top