Boats on Used Victoria and Other Areas

seabeyond said:
I have talked to that guy a couple times. He hated the way that boat rode. He's owned many boats and says that's the worst riding one of them all.
Click to expand...
Yeah that's kind of the feeling I got when I talked to him. Only I was considering buying it, so he wasn't nearly as honest with me.
 
kaelc said:
Kinda remember that. Crazy how some people paying moorage relist and relist at basically the same price.
Click to expand...
That’s not the same boat. The one at Burrard for $124k was a freshwater submersion boat with Yanmar diesels.

You can see it listed in this thread:
https://sportfishingbc.com/threads/...a-and-other-areas.67127/page-465#post-1064029

The one currently listed for sale is very clean - it is at Oak Bay Marina near the entrance/breakwater. The engines look pristine - and one thing I really like about it is that the entire engine (including the full trim ram assembly) sits completely out of the water.

My boat is a few slips away and I have been walking by this one drooling over it for a couple of years.
 
Sailfish25 said:
That’s not the same boat. The one at Burrard for $124k was a freshwater submersion boat with Yanmar diesels.

You can see it listed in this thread:
https://sportfishingbc.com/threads/...a-and-other-areas.67127/page-465#post-1064029

The one currently listed for sale is very clean - it is at Oak Bay Marina near the entrance/breakwater. The engines look pristine - and one thing I really like about it is that the entire engine (including the full trim ram assembly) sits completely out of the water.

My boat is a few slips away and I have been walking by this one drooling over it for a couple of years.
Click to expand...
Yeah, when my buddy had his whaler moored there I drooled over it as well.
 
trophywife said:
i think this was my neighbours boat, after he got it they did a full retrofit from a partial sinking. totally a fuel pig.
Click to expand...
Yeah, I don't imagine they have the "Freeman" cat efficiency with all that cabin and flybridge. It's more of a ten of millionaires boat who doesn't care or a gulf islander boat? I'd imagine less than 1mpg.

So not the 6-8mpg this bad boy offers?
https://www.facebook.com/share/1Bd2qJ9ENB/ With a 60 command thrust she should do well over 30kn with a light load.

1989 C Dory 16 angler​

$19,500
Listed 2 hours agoin Palmer, AK
 
Very nice Ironwood with new 115 twins. I posted this probably 6 months ago. I guess he was trying to sell at the end of season, took it off over the winter and is now trying again.

If I was in the market for an offshore/near-shore centre console, this would be the one I'd go for. I think its great value (subject to inspection) - but we'll see what the market will bear.

I really love the simplicity of this setup and expect we could all learn a lot about quality boat construction crawling around on this thing. The only thing you could really compare this to is a 22' Bridgeview Centre Console - or maybe a Walker CC - both of which are going to be a lot more than this. Definitely worth the ask, and likely worth spending a bit of cash to bring it up to current standard.

22’ Ironwood welded aluminum boat - boats - by owner - craigslist

Mint condition, new 2023 twin 115 Yamaha motors, 70 hours. Dual batteries. Self bailing. Simrad navigation c/w radar, eclipse gx1300 25watt vhf/fm class transceiver, 2 down riggers, extra fuel...
vancouver.craigslist.org
 
Last edited:
I'm curious peoples thoughts, I am looking at a 2859 Bayliner with a Yanmar and B3. Nice rig but he says when its loaded it doesn't plane. Sips fuel at 9knts.
Been for sale for a year ( bad location), I would want to keep it for 3-5 years.
Wondering what the chance of reselling down the road with a non-planning boat would be??
 
Max123 said:
Very nice Ironwood with new 115 twins. I posted this probably 6 months ago. I guess he was trying to sell at the end of season, took it off over the winter and is now trying again.

If I was in the market for an offshore/near-shore centre console, this would be the one I'd go for. I think its great value (subject to inspection) - but we'll see what the market will bear.

I really love the simplicity of this setup and expect we could all learn a lot about quality boat construction crawling all over this thing.

22’ Ironwood welded aluminum boat - boats - by owner - craigslist

Mint condition, new 2023 twin 115 Yamaha motors, 70 hours. Dual batteries. Self bailing. Simrad navigation c/w radar, eclipse gx1300 25watt vhf/fm class transceiver, 2 down riggers, extra fuel...
vancouver.craigslist.org
Click to expand...

That would be a jigging machine...
 
I’d pass personally. Boats that don’t do what they are designed to do aren’t in demand. If you want a sail boat or a tug style boat you shop for one not a bayliner, the exception is the old style that one member poded. In this environment I would have to steal a boat like that. Even that seasport is sitting at 40k
VWT3 said:
I'm curious peoples thoughts, I am looking at a 2859 Bayliner with a Yanmar and B3. Nice rig but he says when its loaded it doesn't plane. Sips fuel at 9knts.
Been for sale for a year ( bad location), I would want to keep it for 3-5 years.
Wondering what the chance of reselling down the road with a non-planning boat would be??
Click to expand...
 
You must log in or register to reply here.

Similar threads

A
Help with buying my first boat
Replies
237
Views
21K
1marko
1
smokedvw
Determining my next boat and looking for help (17' DE/Hurston, 185 DE, Campion 542, Hewes Sea Runner 180 etc)
Replies
17
Views
6K
Aces
Aces
Franko Manini
SOLD: 20' ThunderJet Luxor Welded Aluminum
Replies
5
Views
4K
Franko Manini
Franko Manini
bMcN
Double Eagle 185 for sale on UsedVic
Replies
6
Views
3K
halimark
H
ExFlyGuy
Pod builder on the island
Replies
14
Views
5K
Fishing?
F
Back
Top