Gallivanter
Crew Member
Lol
New Salish 33' Liquid Metal Custom Build
- Thread starter carpeweekend
- Start date
carpeweekend
Crew Member
Well, it is starting to look like a real boat. Looking at a mid-May completion date 
carpeweekend
Crew Member
Most of the major decisions have been made but a few outstanding items that would like some comments on the gunnel mounts
1) I am putting on Burnwein mounts. Was looking to put 3 on each gunnel so that I could run one rigger off of each side and have another 2 for other uses.
2) Also, another 2 mounts on the rear fish box so that I can add the Burnwein cutting table or pull it off and have access to another couple of mounts for additional rod holders. https://burnewiin.com/collections/tables-cutting-boards/products/cb5315-cutting-board . This board, in turn has two mounts for additional accessories. Anyone have experience with this accessory?
3) Burnwein has an adaptor so that you can use the Njord downrigger mounts. I was told to go with the black as the clear (silver) discolours quickly? Also, if you combine the Njord with the Burnwein mount, does this make the security bolt useless? I assume so?
1) I am putting on Burnwein mounts. Was looking to put 3 on each gunnel so that I could run one rigger off of each side and have another 2 for other uses.
2) Also, another 2 mounts on the rear fish box so that I can add the Burnwein cutting table or pull it off and have access to another couple of mounts for additional rod holders. https://burnewiin.com/collections/tables-cutting-boards/products/cb5315-cutting-board . This board, in turn has two mounts for additional accessories. Anyone have experience with this accessory?
3) Burnwein has an adaptor so that you can use the Njord downrigger mounts. I was told to go with the black as the clear (silver) discolours quickly? Also, if you combine the Njord with the Burnwein mount, does this make the security bolt useless? I assume so?
Aces
Well-Known Member
Was great to see some glimpses from my old stomping grounds
Gallivanter
Crew Member
Hopefully she’s already for Sea this spring, such a beautiful boat. Love this build thread.
carpeweekend
Crew Member
Wanted to provide an update on the build. It is moving along basically on schedule. All of the wiring has been run. Have drilled all the holes for the Burnewiin mounts. Fuel tanks are in. Upper section has been wrapped. Seakeeper is being installed. Electronics are starting to be installed. Here are some pics. ETA for delivery is early June.
Gallivanter
Crew Member
You must be so excited to Sea Trial her for the first time. Thank you for the build thread.
Can’t wait to see the finished work of Art.
Can’t wait to see the finished work of Art.
carpeweekend
Crew Member
Yes, the hull will be black carbon fibre too.
I have the 5420 cutting board and love it, very easy to clip in and out of position. The knife accessory is a good option. Amazing build !!
Pro Tech in North Van - who make the stern tie reels have a few other uses for Burnwiin mounts (see photo) I am mounting the stern reel off our Scotty mount.
They make a great BBQ mount system and that way you can move your BBQ to either side when you are docked .
They build the mounts for Magna, I had to get a custom piece built for our Sea -b-Q
Burnwiin makes a flag mount . I have one I would sell. I wanted to put the flag on the rear cabin roof but was overruled . My plan was so that the stern flag pole was not going to be in the way when trolling or just fishing. Thatflag position is acceptable as per nautical Etiquette
They make a great BBQ mount system and that way you can move your BBQ to either side when you are docked .
They build the mounts for Magna, I had to get a custom piece built for our Sea -b-Q
Burnwiin makes a flag mount . I have one I would sell. I wanted to put the flag on the rear cabin roof but was overruled . My plan was so that the stern flag pole was not going to be in the way when trolling or just fishing. Thatflag position is acceptable as per nautical Etiquette
Attachments
Last edited:
carpeweekend
Crew Member
Yes, my plan was to use the mounts for my Magna BBQ too, and have a mount in the storage locker for the BBQ where it securely lives while not in use. Love the idea of having a stern tie line reel that would also slide into the mount. Thanks.
carpeweekend
Crew Member
A quick build update. Starting to come together. Windows are in. Below are pics of the sink and countertop, lithium ion batteries to power the Seakeeper 2, Suzuki controls at the rear helm station, Burnewiin mounts along the gunnel, and Optimus controls.
Engines have arrived (3 x 300hp Suzuki's). Getting closer. Should be in the water for sea trials in about a month (mid-June).
Engines have arrived (3 x 300hp Suzuki's). Getting closer. Should be in the water for sea trials in about a month (mid-June).
carpeweekend
Crew Member
Counting down the days to launch. Here are some recent photo's showing the boat wrapped and a close up of the FLIR camera on the radar. 
carpeweekend
Crew Member
The engines are also on. Lots of interior finishing left to complete. Hopefully ready for its sea trial in a couple of weeks.
carpeweekend
Crew Member
Also, picked up the 20,000 pound trailer (a bit of overkill for the actual weight). Definitely feel like a long haul trucker pulling this beast. 
Similar threads
