Commander 26 inbored

I helped with a pod re power on a 25’ Bertram twin 200s the boat did 57mph. I think you could be looking at similar results! Should be a fun ride!! your boat is in fresh or salt water?
 
I helped with a pod re power on a 25’ Bertram twin 200s the boat did 57mph. I think you could be looking at similar results! Should be a fun ride!! your boat is in fresh or salt water?
That would be some nice numbers to achieve! The plan will be a few ocean trips a year and maybe a couple lake trips around Golden. Hoping to get out to the coast in August with it.
 
Just for comparison sake, I run mine a little under propped for those times I’m loaded up heavy so I can hit the redline fairly easily most days. Mine will do around 43mph wide open and cruise 28mph at 4250rpm roughly. They are great boats. Tough to find a better 26’ boat for cruising , camping and fishing.
 
Just for comparison sake, I run mine a little under propped for those times I’m loaded up heavy so I can hit the redline fairly easily most days. Mine will do around 43mph wide open and cruise 28mph at 4250rpm roughly. They are great boats. Tough to find a better 26’ boat for cruising , camping and fishing.
I had mine out today and hit 48 mph. I need someone to drive next time so I can see how the motors are sitting in the water. How does a guy figure out the perfect prop set up? 🤔.
 
I had mine out today and hit 48 mph. I need someone to drive next time so I can see how the motors are sitting in the water. How does a guy figure out the perfect prop set up? 🤔.
Nice, that is quick. Well I’m no expert but to start id find out from Evinrude the recommended max rpm range for your engines, load the boat up fairly heavy and make sure at wide open throttle you are in the top end of that range.
 
Only had the old girl out for 2 weeks this summer but I couldn't be happier with how she performed. I recommend taking the pod plunge if you're up for the challenge. Already excited for next summer 🤙
 

Attachments

  • IMG_0600.jpg
    IMG_0600.jpg
    138.7 KB · Views: 153
  • 20240824_061938.jpg
    20240824_061938.jpg
    170.6 KB · Views: 153
  • Messenger_creation_E00431C7-3E5A-4EBD-BD34-F32FECC526AA.jpeg
    Messenger_creation_E00431C7-3E5A-4EBD-BD34-F32FECC526AA.jpeg
    94.1 KB · Views: 153
  • 20240826_135322.jpg
    20240826_135322.jpg
    112.5 KB · Views: 148
Hello
I have this exact boat with the 470 mercury twin. Boat is in Salmon Arm and i would like to do install pods as well. Who would you recommend for pod and fiberglassing.
Thank You
Steven
 
Hello
I have this exact boat with the 470 mercury twin. Boat is in Salmon Arm and i would like to do install pods as well. Who would you recommend for pod and fiberglassing.
Thank You
Steven
Hi Steven, I
Hello
I have this exact boat with the 470 mercury twin. Boat is in Salmon Arm and i would like to do install pods as well. Who would you recommend for pod and fiberglassing.
Thank You
Steven
Hi Steven, I had a local guy in golden help me with the fibreglass and I built the pod. I know papa's marine in sicamous does fibreglass repairs, they may be able to help you out if there's noone in Salmon Arm available.
 
Hi Steven, I

Hi Steven, I had a local guy in golden help me with the fibreglass and I built the pod. I know papa's marine in sicamous does fibreglass repairs, they may be able to help you out if there's noone in Salmon Arm available.
Thanks for the help,i will give them a call.

Steven
 
Back
Top