Boats on Used Victoria and Other Areas

Nice little Lifetimer - a bit pricey relative to other 12ft boats out there - but worth it to the right buyer and the 2-stroke Yamaha is pretty bulletproof

vancouver.craigslist.org

12ft lifetimer aluminum boat with 20hp yamaha 2 stroke - boats - by owner - craigslist

12ft lifetimer skiff deep V, solid boat. Welded, deep draft (20" transom) with 63" beam. Has a 2010 20hp yamaha 2 stroke - long shaft, great engine never had any problems with it. Easy to service....
vancouver.craigslist.org vancouver.craigslist.org
 
Nice looking 18ft outrage with a 150, nearly brand new power. Would be a nice package for a day tripper or as a first boat. Caveat emptor - check the hull for damage & water intrusion in foam, but looks like a nice package.

If you look at it, would recommend seeing how it floats with that 150 - might be a bit heavy in the back considering these were designed for lighter 2-strokes. Check for stress cracks on transom - I bet this is max power for the hull. I'm sure the the 150 feels great, but might be a bit much for a hull this old. Sometimes its better to easy on older equipment.

victoria.craigslist.org

Boston Whaler Outrage 18 - boats - by owner - craigslist

2021 Mercury 150 hp, less than 30 hrs $19k + taxes new 2019 Tuff Aluminum trailer $6.5K + taxes new New Bird Sail Marine Bolster seat $2.5K + taxes new Lowrance Hook 7, new GPS radio, new battery...
victoria.craigslist.org victoria.craigslist.org
 
Last edited:
kaelc said:
Some nice work went into this Tollycraft, maybe shoot him an offer at the end of the month when moorage comes due https://www.facebook.com/marketplace/item/1494743924753025/
Click to expand...

Maybe someone with more knowledge can comment, but I'm always curious about these old V-8 gas engines that look to be running the original carb. Why not at least upgrade to throttle body fuel injection (especially if you are paying for a rebuild) - tons of kits designed for exactly this. You would improve starting, idling, and certainly pickup some fuel economy.

The 350 v-8 is such a great/compact design made only better with fuel injection.
 
Max123 said:
Maybe someone with more knowledge can comment, but I'm always curious about these old V-8 gas engines that look to be running the original carb. Why not at least upgrade to throttle body fuel injection (especially if you are paying for a rebuild) - tons of kits designed for exactly this. You would improve starting, idling, and certainly pickup some fuel economy.

The 350 v-8 is such a great/compact design made only better with fuel injection.
Click to expand...
Looks like an Edelbrock aftermarket manifold, possibly a matching carburetor. It might already have a significant improvement over the stock induction system.
 
Buddha said:
Does anyone have more info on this type of bracket on the main motor for the Pursuit ie does it have advantages or was done that way because of ease of install and price. Haven't seen many brackets that look like that.
Click to expand...
Prefab from the states, that hull with a 250 is going to be a slug, been on a few with twins, but single 250 is definitely underpowered, does not pass the stiz test
 
Aces said:
For cut plugging
Click to expand...
lol put that one cut plugging in Renfrew beside the jackel and lead will be flying 😂😂😂I will sit back and watch the show , we went Hali fishing the other day and amazing how calm he is when there is no boat in sight
 

Attachments

  • IMG_0634.jpeg
    IMG_0634.jpeg
    103.8 KB · Views: 125
You must log in or register to reply here.

Similar threads

A
Help with buying my first boat
Replies
237
Views
21K
1marko
1
smokedvw
Determining my next boat and looking for help (17' DE/Hurston, 185 DE, Campion 542, Hewes Sea Runner 180 etc)
Replies
17
Views
6K
Aces
Aces
Franko Manini
SOLD: 20' ThunderJet Luxor Welded Aluminum
Replies
5
Views
4K
Franko Manini
Franko Manini
bMcN
Double Eagle 185 for sale on UsedVic
Replies
6
Views
3K
halimark
H
ExFlyGuy
Pod builder on the island
Replies
14
Views
5K
Fishing?
F
Back
Top