What Did You Do To Your Boat This Week?

salmonkiller01 said:
How does ity run now? Your happy with it?
Click to expand...
I changed out the prop yesterday and it was better.Today I raised the motor by 2 holes and it seems even better now,But it was still pretty choppy out front today,so not the best test.The porpoising is gone though.I did bash around the waterfront at 35 MPH with my sore back to test it.Unfortunately I fell at the slimy ramp onto the trailer while loading the boat and it feels like I broke my ribs,but not going to our nasty emergency room just yet.I'll see how it feels tomorrow.Always something it seems to keep me off the water.
 
Rayvon said:
I changed out the prop yesterday and it was better.Today I raised the motor by 2 holes and it seems even better now,But it was still pretty choppy out front today,so not the best test.The porpoising is gone though.I did bash around the waterfront at 35 MPH with my sore back to test it.Unfortunately I fell at the slimy ramp onto the trailer while loading the boat and it feels like I broke my ribs,but not going to our nasty emergency room just yet.I'll see how it feels tomorrow.Always something it seems to keep me off the water.
Click to expand...
The fall sucks and as we get older the recovery takes longer. Great the boat is better. 35mph in chop. Yikes! My back is sore thinking about that. I like to wallow thru chop and slop!
 
Rayvon said:
I changed out the prop yesterday and it was better.Today I raised the motor by 2 holes and it seems even better now,But it was still pretty choppy out front today,so not the best test.The porpoising is gone though.I did bash around the waterfront at 35 MPH with my sore back to test it.Unfortunately I fell at the slimy ramp onto the trailer while loading the boat and it feels like I broke my ribs,but not going to our nasty emergency room just yet.I'll see how it feels tomorrow.Always something it seems to keep me off the water.
Click to expand...
I’m sorry to hear about your fall. Ribs aren’t a fun thing to hurt. Bruised ribs 3 weeks, cracked ribs 6 weeks. Don’t hang around anyone that can make you laugh.
Glad to hear that the boat is running better. No more porpoising is a very good sign. Like salmonkiller said, 35mph in the chop sounds very good 👍.
 
Last edited:
I did a bit of idea implementation on the boat yesterday.

Last year when we were getting some electrical work done on the boat I asked the tech to draft a "current" wiring diagram for me.

I sent the PDF's to Staples and I had the print them up in color and then laminate them for me.

I made 3 copies - one for the file, a loose set for the boat and a third set that I double taped inside the largest transom door - which is also the battery door

Now Grade 10 Electrical shop is 55 years ago in my past but at least when there is a question about the wiring I can show folks the door.

The a copy of the wiring diagram is always at hand and we have one permanently mounted in front of the batteries.

1754845534310.png
 
Last edited:
Then I dealt the case of the Missing Boat Hook

Excuse the mess in the cockpit.

1754846801336.png


It is easy to misplace stuff in the gunnel storage and sometimes the Boat Hook is needed ASAP and sometimes the hook is MIA under other "things."

When we are docking or mooring the rear cabin door is always open and the poles are always at hand. I am going to mount the second Boat hook under the side gunnel storage rack.

There was just enough room for the Hook & Moor pole as well. That is the Cat's But for picking up a Mooring Ball. (A** was censored, as was But with to T's)

hookandmoor.com

The Ultimate Boat Hook | Contact us & get yours today

Hook & Moors Boat Hook - with its superior functionality let's you stay onboard when mooring, docking & anchoring | The ultimate boat hook | Get yours now
hookandmoor.com hookandmoor.com
 
Last edited:
@Bill 310 nice work on the electrical! I’m 20% there, incomplete excel diagram and shrink wrap label maker putchased but only used a couple times. If they drop the luxury tax and you get 2 footitus let me know, I won’t be able to afford your ride but someone I know mights!!

I was looking at Trotac’s “affordable” version of the mooring boy hooks last night while sleeping on the hook after using a mooring buoy for a couple hours at Tumbo. Nice to have a system for the things we need in a hurry. My always in the funnel knife is now sitting on someone else’s boat or the dock at Sidney spit after being used as my sons bait knife.
 
Went to Princess Auto on Saturday and bought a 'horse stall mat' - which is basically a 3/4" thick rubber mat. 3'x4' weighed about 45lbs, and I trimmed the corners to fit up in the bow. I needed a bit more weight up there and was hoping that the rubber would provide some noise dampening.

Very happy with how it turned out, and does provide a bit of noise dampening. Might buy a second one to cut up and put under the seats for a bit of additional dampening. Costs about $45/mat
 
Max123 said:
@Bill 310 - what did you use to make the electrical diagram? Very nice/clean!
Click to expand...

If I was being flip I would say my credit card.

However, the real story is that a few years ago we were having some issues with the batteries not charging on the boat.

I had a tech come out from a Vancouver Firm and he diddled around and did nothing, but managed to leave early and pad his time sheet. On his second and last visit he drew up a electrical schematic. Note to folks trying to rip clients off - Just because your client is wearing an orange t shirt. pants with suspenders and clearly exhibits all the signs of ADHD /OCD don't think he is not observing and recording what you are doing.

Now I am 70, but I did take shop in high school for a few years and I knew that the schematic I paid for was crap.

So.. I ran it by a pal of mine who is a P.Eng in Electrical Engineering. He listed all the mistakes / errors, etc. in the diagram and I wrote a pleasant but concerned letter to the Company.

They sent out a different tech who fixed the original problem and then sketched out the setup in his notebook and told me he would email me something. He did the schematic using CAD and sent me colour PDF's. It was and is a brilliant piece of work.

I had my P.Eng friend review it and he gave it two thumbs up. So I printed copies at Staples and double -sided taped it to the inside of the door.
 
MRWood said:
I’m sorry to hear about your fall. Ribs aren’t a fun thing to hurt. Bruised ribs 3 weeks, cracked ribs 6 weeks. Don’t hang around anyone that can make you laugh.
Glad to hear that the boat is running better. No more porpoising is a very good sign. Like salmonkiller said, 35mph in the chop sounds very good 👍.
Click to expand...
I cracked em, doctors were more concerned about internal bleeding,pneumonia and/or blood clots that havent materialized.Looks like my fishing season is cut short again.It won't be 6 weeks before I'm back out though,I'm getting great reports about local fishing and won't be able to resist getting out there somehow.
 
At last, some time to reinstall fuel injectors, coils, etc and install the new injector coefficients on the EMM. Also replaced a broken shift lever molding that was preventing trim up. Started fine and warmed up, used the EVDiag software to drop cylinders, confirming that all four are firing now.
 
I took the lines that I permanently keep on the bow cleats (and tied off on the mid cleats) off the boat and washed them to get the salt and gunk out of them.

I did this because I just ordered some extra lines and they came with a little note reminding me to wash my lines annually.

When we were building the boat by my brother (who was a wooden boat guy) told me about a Canadian Marine Rope manufacturer in Ontario .

Online Rope Store - Your Trusted Destination for Quality Marine Ropes

OnlineRopeStore is your one-stop shop for premium marine ropes and hardware. We stock a huge range of marine rope such as anchor lines, dock lines, fender line and loops, mooring pendants and polyester sailing braid. Our ropes are expertly crafted in Canada from the best quality materials. Shop...
onlineropestore.com onlineropestore.com

They have enough colours that I can colour code lines by length and task

Double Braid Blue for dock Lines

Double Braid Red for Spring Lines

Green Double Braid for when you wake up in the night and see through the hatch that the 50 foot wooden sailboat boat tied up just in front of you while the owners went back to Vancouver is stretching it's crap lines because a strong westerly came up and your anchor is about to make contact with its' stern

They have 15 colour options doe Double Braid

We have Nylon 3 Strand permanently tied to the dock in our slip. I am amazed that so many people at the Marina haven't taken the time to pre-tie dock lines. When I replace these lines I will buy double braid - it doesn't lose its' pliability like 3 strand does

Their Ropes are all made in Canada and free shipping if you spend over 0. 11 % of a boat dollar



1755547403643.png
 
Rain City said:
You're replacing the stuff that's two years old???!
Click to expand...
yep. no obsolete stuff here.
maybe i'll ebay the old stuff.
cant actually handle the boat solo with analog controls. the digital ones have remote handhelds and programming so i can control the boat steering and propulsion from the dock - or my phone. hard to control something the size of 3 semi trucks side by side solo without crew unless you use digital help.
 
Last edited:
You must log in or register to reply here.

Similar threads

Max123
Toolbox - What tools?
Replies
40
Views
3K
kaelc
kaelc
Chummer
On the hunt for a boat
Replies
95
Views
10K
Chummer
Chummer
B
1981 campion 210 discovery
Replies
23
Views
2K
brad fox
B
RiverBoy
Replacing dual sleepers on my DE 185
Replies
2
Views
302
RiverBoy
RiverBoy
C
Need to clarify current taxes for a used boat, trailer and gear.
Replies
47
Views
5K
kaelc
kaelc
Back
Top