Boats on Used Victoria and Other Areas

seattle.craigslist.org

2017 NC895 Jeanneau - boats - by owner - marine sale - craigslist

LUANA is an exceptionally well maintained "turn key" NC 895 Jeanneau that has been well cared for while enjoying undercover moorage since new, continued maintenance, and delicate use. This is a...
seattle.craigslist.org seattle.craigslist.org

237k cad before all exchange rate premiums, survey, taxes, etc. Probably 270-280 after buying tacos but sleeps a family of 4, maybe 5. Wonder if she’ll sell after the boat shows. I know people are looking for something like her..
 
Tried to convince two buddies who are looking to buy this. If I didn't love my boat and wasn’t scraping together Pennies to pay for swim lessons and truck repairs, I’d buy this and then start hunting hard for a private sale in Canada on a used set of 4 strokes. Never bottom painted and equivalent to a 500k boat new I figure? Triple axle trailers are about 25k cad before taxes, yes you could easily sink 10k into the trailer but you won't want to trailer her often, so you might be able to put the work off and she can handle more weather than most people. With a used set of 4 strokes you might be into her for less than 100k taxes in but you would have to do a ton of work yourself and we”ll see if the boat show specials brings more used engines to the market

28 Boston whalers conquest 2001 with 2006 optimaxs 45k usd in WA. Sleeps 3-4

https://www.facebook.com/share/19zrz9FzJW/?mibextid=wwXIfr
 

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.
www.facebook.com www.facebook.com
35k usd, worth spending a few weeks down in the warm waters with her
2005 C-Dory 22' Cruiser





Has 2005 90 hp Yamaha 4 stroke with 725 hours. Has lowrance gps and fish finder. Has rear floor panels. Full rear curtain enclosure (super nice for cold weather), microwave under driver seat sink and dual fuel tanks. Has all hookups and mount bracket for kicker motor on stern. Boat also has hydraulic trim tabs. Double axle galv trailer in good shape. Ready to go.
 
dmurph said:
Wouldn’t want 2 of them to gas up but I’m not anti inboard like most people. I think new or low hour inboards that get maintained are totally fine for the right boat. Those amberjacks are pretty sweet combo of comfort and fishing for anyone looking for a bigger boat.
Click to expand...
Yeah, a lot of boat especially with newer engines/etc. My brother has a 30 foot bayliner with a single big block gasser and uses it more than 99% of people. Tough to move up from a single engine, dialed in trailerable boat, like you have but the comfort of the big boats look so tempting.
 
kaelc said:
seattle.craigslist.org

2017 NC895 Jeanneau - boats - by owner - marine sale - craigslist

LUANA is an exceptionally well maintained "turn key" NC 895 Jeanneau that has been well cared for while enjoying undercover moorage since new, continued maintenance, and delicate use. This is a...
seattle.craigslist.org seattle.craigslist.org

237k cad before all exchange rate premiums, survey, taxes, etc. Probably 270-280 after buying tacos but sleeps a family of 4, maybe 5. Wonder if she’ll sell after the boat shows. I know people are looking for something like her..
Click to expand...
Didn’t a well known SFBC member just buy one for under $2k? Seems pricey
 
Who's doing a repower?

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com
 

Attachments

  • Screenshot_20250116-134417_Samsung Internet.jpg
    Screenshot_20250116-134417_Samsung Internet.jpg
    137.8 KB · Views: 24
Aquaholic said:
Always a difference in the details. Twin 200's on this, a bit newer, maybe other differences. I was on the RC boat, I see why they seem to sell well.
Click to expand...
Correct, mine is a 2014 with 150s and was built in Poland. It still cruises at 26-28 knots at 4200-4400 RPM burning 60LPH. These "NC" branded ones are built in the states. I did pay a little under 200 but I'd be willing to take offers if someone was interested 😉. Now that it's become a killing machine, it has proven worth.
 
Rain City said:
Correct, mine is a 2014 with 150s and was built in Poland. It still cruises at 26-28 knots at 4200-4400 RPM burning 60LPH. These "NC" branded ones are built in the states. I did pay a little under 200 but I'd be willing to take offers if someone was interested 😉. Now that it's become a killing machine, it has proven worth.
Click to expand...
Rechristening her as the Windex Express might add a couple bucks to the resale value 😜
 
Rain City said:
Correct, mine is a 2014 with 150s and was built in Poland. It still cruises at 26-28 knots at 4200-4400 RPM burning 60LPH. These "NC" branded ones are built in the states. I did pay a little under 200 but I'd be willing to take offers if someone was interested 😉. Now that it's become a killing machine, it has proven worth.
Click to expand...
Killing machine… are we missing some juicy fishing reports!?
 
You must log in or register to reply here.

Similar threads

Chummer
On the hunt for a boat
Replies
96
Views
16K
Tommygun
Tommygun
aeroblade
Help with buying my first boat
Replies
237
Views
42K
1marko
1
smokedvw
Determining my next boat and looking for help (17' DE/Hurston, 185 DE, Campion 542, Hewes Sea Runner 180 etc)
Replies
17
Views
8K
Aces
Aces
Franko Manini
SOLD: 20' ThunderJet Luxor Welded Aluminum
Replies
5
Views
5K
Franko Manini
Franko Manini
bMcN
Double Eagle 185 for sale on UsedVic
Replies
6
Views
4K
halimark
H
Back
Top