Aquaholic
Crew Member
Does yours have shore power?
Boats on Used Victoria and Other Areas
- Thread starter kingblazer84
- Start date
Capt_Ed
Crew Member
scott craven
Well-Known Member
Depending on the shape of the floor and transom $4-6 K
(only my opinion)
With the market on used boats lately though, I could be out to lunch.
(only my opinion)
With the market on used boats lately though, I could be out to lunch.
EZZ70
Well-Known Member
Does it look like a 18'er to you guys?
Gungho
Crew Member
Opinions??
Classic Grady White - boats - by owner
This boat was purchased in the Spring of 2019 as a short-term replacement for our regular boat, undergoing repairs. It is a 1980 model, 20 ft. production fiberglass pleasure cruiser ;Grady White...
vancouver.craigslist.org
kingblazer84
Crew Member
@DarylH1993 2352 Bayliner Trophy
C$32,000
Bei Facebook anmelden
Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.www.facebook.com
View attachment 63087View attachment 63086
scott craven
Well-Known Member
Fisherman Rob
Well-Known Member
From the height of the gunnels near the stern it almost looks like it could be a “18” (people call these 18 but they are actually 17’). The windshields been modified and makes it look like a 16’.
EZZ70
Well-Known Member
The guys just measures it for me and its 211" so guess its a 17'5, do that seem right?
Gungho
Crew Member
your math is perfect
EZZ70
Well-Known Member
no no no silly, does the boat and characteristics are that of a 17'5.your math is perfect
Fisherman Rob
Well-Known Member
Math: 211" / 12' = 17.583' and 0.583' x 12" = 6.99" therefore 211" = 17' 7". For sure it's not a 16' DE, however Double Eagle website says a DE 176 measures 17'-1" LOA. Not sure how it would measure 211" unless DE changed the length of the mold at some point.
Last edited:
Slabbedout
Well-Known Member
So
Sounds like the owner may have measured it incorrectly ?
Regardless it sounds like it’s bigger than a 16. Just looks like the windshield is chopped and to far forward ?
Sounds like the owner may have measured it incorrectly ?
Regardless it sounds like it’s bigger than a 16. Just looks like the windshield is chopped and to far forward ?
brutus
Well-Known Member
Brant do a lot of refurbishment on older GW , they do good work. Worth the look for sure.Opinions??
Classic Grady White - boats - by owner
This boat was purchased in the Spring of 2019 as a short-term replacement for our regular boat, undergoing repairs. It is a 1980 model, 20 ft. production fiberglass pleasure cruiser ;Grady White...vancouver.craigslist.org
View attachment 63093
kaelc
Crew Member
The motor, steering and controls would be over 20k to install today so it’s a good starting point, with only 50 hours. You can go to the hull truth or a Grady forum to get an idea of the ride of these hulls. Tough to find anything with 2010+ power at that price. I believe You can get a nice tuff single axle trailer that can handle that boat nicely but then you are over 30k for a really old boat. Maybe worth spending 40k on a mid to late 2000’s equipped with a kicker and a trailer. I would really look for soft spots but the stringers would be the biggest issues with these as they would hopefully have redone the transom. There is an interesting $1 boat rebuild series on YouTube about an old Grady.Opinions??
Classic Grady White - boats - by owner
This boat was purchased in the Spring of 2019 as a short-term replacement for our regular boat, undergoing repairs. It is a 1980 model, 20 ft. production fiberglass pleasure cruiser ;Grady White...vancouver.craigslist.org
View attachment 63093
Stizzla
Crew Member
Wait till you see what $1,000,000 buys you for a house in Vancouver these days. Oh wait... it doesn’t
Similar threads
