Wild Bill
Well-Known Member
So asking for a little guidance....
I have some hardware on the front deck, bow roller, a place to stow anchor, and rope stuffed down a little hole while your sticking out of a little hole trying to stuff rope through a little hole. Looks kinda cool but if I get the gist there are better ways to anchor. I'm thinking removing all that, plugging holes and anchoring with a ball, collecting on the side. Guys use their pot pullers for pulling anchor line? Your going to have buckets of line anywhere anyways right. That's what I have been looking for is how everyone deals with all that line.
I have lowrance lms 350a, cool gps thing, paddle wheel, it lights up, all 00000. Recycle it? I would be looking like $1000 budget.
Any ideas for a prop? 14-15 /19? 4 blade aluminum. To much? 225 optimax 1.75/1. I think it's going to be kinda light and stiff, thinking solid.
What would you buy for a radio? Gps encoding transmission recording or a $150 radio.
Crap day in the cuddly, all the flooring crap gone. Ceiling nuts over carpet next. I'll get v berth cushions and it won't be so bad. However vacuumed and everything nice and clean.
Wiring and dash next.. that's what I did ! So easy full rewire. Thinking battery's like a couple 31's sieres either side front side of engine compartment, behind the 2x6 beam. So fuel lines coming down the centre between battery's, bilge pumps between battery's and fuel tank.
So getting to fuel tank, I could buy 2 4x8 sheets and so do 90 gal us for $420 materials, $275 for 60 us.
No looking forward to hearing some opinions... really!
I have some hardware on the front deck, bow roller, a place to stow anchor, and rope stuffed down a little hole while your sticking out of a little hole trying to stuff rope through a little hole. Looks kinda cool but if I get the gist there are better ways to anchor. I'm thinking removing all that, plugging holes and anchoring with a ball, collecting on the side. Guys use their pot pullers for pulling anchor line? Your going to have buckets of line anywhere anyways right. That's what I have been looking for is how everyone deals with all that line.
I have lowrance lms 350a, cool gps thing, paddle wheel, it lights up, all 00000. Recycle it? I would be looking like $1000 budget.
Any ideas for a prop? 14-15 /19? 4 blade aluminum. To much? 225 optimax 1.75/1. I think it's going to be kinda light and stiff, thinking solid.
What would you buy for a radio? Gps encoding transmission recording or a $150 radio.
Crap day in the cuddly, all the flooring crap gone. Ceiling nuts over carpet next. I'll get v berth cushions and it won't be so bad. However vacuumed and everything nice and clean.
Wiring and dash next.. that's what I did ! So easy full rewire. Thinking battery's like a couple 31's sieres either side front side of engine compartment, behind the 2x6 beam. So fuel lines coming down the centre between battery's, bilge pumps between battery's and fuel tank.
So getting to fuel tank, I could buy 2 4x8 sheets and so do 90 gal us for $420 materials, $275 for 60 us.
No looking forward to hearing some opinions... really!