Foxsea
Well-Known Member
I have a Standard Horizon VHF. If it's never had MMSI programmed, do it yourself - I did. If that number changes, then it's a factory reset.
What Did You Do To Your Boat This Week?
- Thread starter Stizzla
- Start date
pescador
Well-Known Member
When I got my Grady 12 years ago........ the ICOM radio had been programmed with a South Carolina MMSI. All my research said it's a one time thing or a factory reset. Not so, I got my new MMSI a few weeks after buying the boat, went to the manual and followed the instructions and it took the new number. The exact details are foggy after 12 years but it definitely took the new MMSI.
Rain City
Crew Member
I know that with mine, the owner had removed his from the unit. I keep forgetting to add one back in, but it's currently not reading one.
Foxsea
Well-Known Member
Yeah, it's likely brand and age dependent. The manual on my 8 year old unit says factory reset. I confirmed that with the radio tech in C.R. I was concerned with making a mistake entering the number but the process is straightforward.
That is super cool.
The Green Bastard
Active Member
Finally was able to launch it and go fishing after discovering it had rot in the stringers and transom last March. New stringers keel transom deck(all wood replaced) fixed leak in pod, installed rear helm 2 new batteries washdown pump fuel filter etc.. This week I installed the EVA flooring and the seats and that pretty much finished it off. Sure was lame last summer grinding and applying fiberglass instead of fishing but it feels great to be back on the water.
Everything new worked great but my existing little diesel heater was smoking like crazy so a replacement has been ordered
Everything new worked great but my existing little diesel heater was smoking like crazy so a replacement has been ordered
Stizzla
Crew Member
Pics or none of it happened
kaelc
Crew Member
Yeah, some standard horizon you can, others you can not and have to send to the dealer for a fee. Just research before buying used and often dealers have rebates on new radios.
Doubleheader
Well-Known Member
Made some progress on the ole 18’2”. Oooof the mains and transom stink. 3 layers of 3/8” with csm between in the stern so far. Still undecided how to hang power off the back…
wolf
Well-Known Member
WELL complete rewire for ol bulewolf 2.0 I had a bit of a gremlin last year where the odd time the radio would come on and off for no reason and voltage would drop big time.
So thankfully my buddy whos a marine tech/installer we dug into it took out about 120 feet of wire and shortened runs up and bumped up the guage big time .
SO what we found one of the main leads from way back (probally when first wired) looked great felt great till we opened it up it had a open end lug where in marine its suppsed to be all closed end. So we bumped it up to a way bigger size wire anyways BUT we had to see why it was not good over many many years the wire was black/green almost a foot in. found 3 other issues where wires that looked ok really werent as we put alot of new ends on the wires and repalced any that were scketchy.
Also made a home made flushing kit so I can flush kicker and main all in one shot with out stepping onto the swim grid. with shut off valves etc.
Plus my yearly clean up of it in general found way too many spoons and flashers I dont know what creature keeps putting gear in my boat but seems to grow every year LOL
So thankfully my buddy whos a marine tech/installer we dug into it took out about 120 feet of wire and shortened runs up and bumped up the guage big time .
SO what we found one of the main leads from way back (probally when first wired) looked great felt great till we opened it up it had a open end lug where in marine its suppsed to be all closed end. So we bumped it up to a way bigger size wire anyways BUT we had to see why it was not good over many many years the wire was black/green almost a foot in. found 3 other issues where wires that looked ok really werent as we put alot of new ends on the wires and repalced any that were scketchy.
Also made a home made flushing kit so I can flush kicker and main all in one shot with out stepping onto the swim grid. with shut off valves etc.
Plus my yearly clean up of it in general found way too many spoons and flashers I dont know what creature keeps putting gear in my boat but seems to grow every year LOL
Foxsea
Well-Known Member
I spray all connections with Fluid Film. It takes up the tiny spaces that would otherwise be occupied by salty moisture and corrosion.
SpringFever552
Well-Known Member
wolf
Well-Known Member
use corrosion bock etc that one main one had a open eye and the corroisin over many year it just crept up main issue was with the breaker on one side under the nut as well couldnt see anythinghe showed me lots I never knew. word of advice clean and check all terminal ends for corrosion an wire brush or just replace and proper shrink tubing, then spray...
kaelc
Crew Member
Glad you got her sorted out! Pretty ship shape with new power and electrical now. Your friend is so busy he won’t return my calls! I better text him my Tofino dates to see if his camping aligns with mine this summer, nothing like a fishing bribe, I need a call back!
wolf
Well-Known Member
Glen?
Doubleheader
Well-Known Member
Transom on the 18’2” hourston done. 5 units of 3/8” ply, 4 units 1oz matte, 2 units 2oz matte and 2 units 17oz biaxial all said and done. Finished up thickness about 2.15”. Should be good for a 200 of some sorts. Started demolishing floors and stringers, what a travesty lol.
Attachments
seachicken
Well-Known Member
Nice, what are you powering that up with?
Similar threads
