FishNmemories
Member
pics looks good sk01...glad to see your still making progress...best part is once its done you'll have a solid transom that will last you years!! But ouch on the price per sheet

Nobody noticed no thru hulls in the transom anymore. I am going to get away from the scuppers and big holes in my transom by utilizing a floor drain and thru hull out the side. What do you think?
Thanks Duffer, good luck on fishing, are you going for flatties??
Pod is back on, 2 tubes of 5200. I wont be removing again. Now to start putting the floor back in.
Nobody noticed no thru hulls in the transom anymore. I am going to get away from the scuppers and big holes in my transom by utilizing a floor drain and thru hull out the side. What do you think?
I have had my pod off to re-powder coat it once and will take it off the next time I have the power off to do the same. I used Sika around the 6 bolt holes then ran a bead around the pod to seal it watertight. I'm kinda wondering why you used an adhesive instead of a sealant...as the bolts do the work. I want to get mine off fairly easily without tearing all the gel off.
Ya I am thinking a drain in each rear corner, like you said if it plugs there always another. As I am replacing 2 feet of floor in the back I will shape it so water will run to each drain.