Looking for a Raymarine guru

Marty-party

Member
I recently bought a 21’ aluminum centre console boat with all Raymarine electronics. It has P70s auto pilot, HD open array raydar, es series eS128, AIS 350, Evolution EV-100, E 12139 hydraulic pump and Ray50 radio.

I have been having trouble with my autopilot having a large heading deviation, my chart plotter loosing GPS/AIS connection, my chart plotter showing the boat tracking on a different heading that the chart plotter and my Ray50 radio not getting GPS coordinates.

It has been to 2 marine shops and they both have given me different answers on why I have this problem. I know it worked at some point and it is wired/installed very nicely.

I am looking for a shop or person that specializes in Raymarine electronics (preferably mobile), that can help get this fixed.

Thanks in advance.
 

Attachments

  • IMG_4220.jpeg
    IMG_4220.jpeg
    382.6 KB · Views: 68
M&P sells boats that come with them from the factory. You could try their service department.
That is a very nice dashboard set up.
 
Does your network have more than 1 GPS/heading source? Make sure the desired one is selected.
 
Is your sat signal strength for you gps good? If not, and if you do not already have one, an external gps antenna may be the answer.
 
Make sure the pump is big enough for the ram that is installed. I installed a similar system on my Orca and it was struggling to hold its course.I went up two pump sizes and It’s working fine.I have two heads fore and aft.May not be your problem but it solved mine
 
Thanks for the replies everyone. I ended up getting it all figured out with the help of Levy at Leftmost yacht service, can’t recommend him enough for Raymarine electronics!
 
Back
Top