Aluminum boat owners - What are you going to use for Antifouling bottom paint?
- Thread starter Hot-Streak
- Start date
Hull Maxx
NASCO WORLDWIDE proudly introduces HULL MAXX, a revolutionary, superior, clear, environmentally friendly, foul-release product that replaces heavy, ablative, polluting bottom paint and provides improved vessel performance. HULL MAXX- A REVOLUTIONARY, CLEAR CHOICE This environmentally friendly...
nascoworldwide.com
This stuff. Interesting concept. I don't moor my boat, and I don't want it sliding off the bunks willy nilly either.
Hempel Silic one
Aquaholic
Crew Member
S
who and where?
ship happens
Crew Member
What about getting one of those boat parking float thingamagigs
Pineapple Express
Well-Known Member
Here's that little video clip:
Live2Boat on Instagram: "This is how easy it is to clean an aluminum hull coated with Hull Maxx from @nascomarine. I sprayed the hull down with fresh water to wet down the small amount of growth. Then I hit it with a soapy wash mitt. The small amount
70 likes, 6 comments - live2boat_official on October 13, 2024: "This is how easy it is to clean an aluminum hull coated with Hull Maxx from @nascomarine. I sprayed the hull down with fresh water to wet down the small amount of growth. Then I hit it with a soapy wash mitt. The small amount of...
www.instagram.com
CalCom
Member
OK honest question so don’t slaughter me….is bare aluminum that bad? I have a 2023 Duckworth that I have put in a marina from May 1 to October. When I pull it out I get it winterized which includes pressure washing the hull. I get that there will be some growth during that time in the water but does that warrant painting or are you talking about boats that essentially stay in the water year round? Again, honest question.
Cheers
Cheers
submerged
Active Member
When I worked on shellfish farms, none of our aluminum work boats were painted, as we didn’t want the toxins near the product. That said, we had a marine ways and a commercial pressure washer to keep the boats clean. Cleaning them on a trailer is a pain.
In the summer there can be a lot of growth in a month. If there’s a big barnacle set, your boat will be completely covered in a couple weeks. Sometimes if we left the boats too long we’d have to scrape them with a hoe, as even the pressure washer would fail. You’ll also never get back to a smooth hull without sanding, as the base of the barnacles are stubborn. That however was in a high growth area.
InterMechanico
Well-Known Member
Hull Maxx
NASCO WORLDWIDE proudly introduces HULL MAXX, a revolutionary, superior, clear, environmentally friendly, foul-release product that replaces heavy, ablative, polluting bottom paint and provides improved vessel performance. HULL MAXX- A REVOLUTIONARY, CLEAR CHOICE This environmentally friendly...
This stuff. Interesting concept. I don't moor my boat, and I don't want it sliding off the bunks willy nilly either.
Adding the epoxy barrier coat required before bottom paint is an effective way to electrically isolate your boat from stray currents in the marina. I’ve never been that worried about preventing growth, but preventing galvanic corrosion is a priority.
Aquaholic
Crew Member
Stray currents. The bane of a metal boat and a marina with power.
Similar threads
