WTB: Mercury 485 inline 4 transom plate

[big.griff]

Looking for a transom plate to fit a 180hp inline 4 Mercury 485. I believe the engine is around the 1980 vintage. Don't believe v6 or v8 transom plates will work. Any leads or input is appreciated.

 

[noluck]

http://www.southcentraloutboards.co...ver-1972-1981-165hp-85786-62264-53001-s018967

i have one of these, i should be going through Nanaimo tommorow morning

 

[big.griff]

http://www.southcentraloutboards.co...ver-1972-1981-165hp-85786-62264-53001-s018967

i have one of these, i should be going through Nanaimo tommorow morning

Ok. What do you want for it? You can give me a call if you prefer 250-714-6658. Jeff

 

[big.griff]

Unfortunately noluck's was different so I am still looking. Part number 65550A2 is what I need or possibly 79000 will work.

 

[noluck]

http://vancouver.craigslist.ca/rds/bpo/5615389777.html

here are some 485 parts

 

[big.griff]

http://vancouver.craigslist.ca/rds/bpo/5615389777.html

here are some 485 parts

Perfect, thanks. We've found that we need a couple more parts so that should help

 

[noluck]

awsome

 

[turbomack]

i have a transom shield and alpha one leg that was behind a 490 collecting dust if you still need parts. free to a good home

 

[big.griff]

i have a transom shield and alpha one leg that was behind a 490 collecting dust if you still need parts. free to a good home

Don't really need a leg, by transom shield do you mean the plate on the inside of the transom or the gimbal housing or whatever it's called.

Any of the exhaust elbows that go between manifold riser and leg?

 

[turbomack]

Don't really need a leg, by transom shield do you mean the plate on the inside of the transom or the gimbal housing or whatever it's called.

Any of the exhaust elbows that go between manifold riser and leg?

both.i have everything from the cush drive back and the exhaust piping.the transom shield has the rear motor mounts cast into it