What Did You Do To Your Boat This Week?

[Alex_c]

I do…..

VEVOR Diesel Air Heater, 5KW 12V Diesel Parking Heater, with LCD Monitor, Air Diesel Heater Parking Heater with Silencer for Truck Boat Car Trailer | VEVOR CA

Shop VEVOR Diesel Air Heater, 5KW 12V Diesel Parking Heater, with LCD Monitor, Air Diesel Heater Parking Heater with Silencer for Truck Boat Car Trailer at lowest price, 2-day delivery, 30-day returns. Shop now at VEVOR.

m.vevor.ca

Awesome, just ordered one. Was thinking of spending $200 on one during “prime” days, but usually that’s a scam. Glad I waited.

Pics of the trailer added. I gotta put a new axle in it. I got a 2200 lb torsion axle for free when I built it, and the 31” tires were a bit too much for the tiny spindles, which are now bent, and cause the wheels to camber in a bunch. Got a 3500 leaf sprung unit going in, but I gotta fab and weld in some new mounting points on the frame.


Not boat related, but once I get this done I can start doing work on my boat. Have been putting it off al year lol.

 

[kaelc]

Picked up an AGM starting battery, hopefully a little better for running the stove off it then the regular one that was due for a swap anyways.

 

[Aquaholic]

View attachment 99135
Picked up an AGM starting battery, hopefully a little better for running the stove off it then the regular one that was due for a swap anyways.

One of my fishing partners is an electrical engineer, and that’s what he suggests that I switch to this winter. He sent me a litany of reasons why, but because I only run one battery, he really thinks it would be the way to go.

 

[kaelc]

One of my fishing partners is an electrical engineer, and that’s what he suggests that I switch to this winter. He sent me a litany of reasons why, but because I only run one battery, he really thinks it would be the way to go.

Yeah, since another member asked it’s an AGM absorbed glass matt with the right cold cranking amps for my engine and a deep cycle. The idea is you can draw them down more then a regular deep cycle and maintain voltage.

Costco has a slightly better deal on them, than can tire but you have to order online. This was used once for an electric motorized foil canoe project so only 150$. Regular about $300. (I’ll get you guys a video, Uvic engineering project)

I have to long a run to my house battery for my wallas stove/heater fan so want something robust for it to run throughout the night and still allow the boat to start in the morning. I’d have gone lithium but a good starting one is pricy https://dakotalithium.com/product/d..._dglKB-56nV3vqTyymQARHv1FpEHp2CBoC6UoQAvD_BwE

 

[Sea Chaser]

Maintenance day .
Gear oil , engine oil on both main and kicker .
Trailer bearings Repacked .
Bled my hydraulic steering as was feeling a little soft .

Beer me .

 

[Sir Reel]

Yeah, since another member asked it’s an AGM absorbed glass matt with the right cold cranking amps for my engine and a deep cycle. The idea is you can draw them down more then a regular deep cycle and maintain voltage.

Costco has a slightly better deal on them, than can tire but you have to order online. This was used once for an electric motorized foil canoe project so only 150$. Regular about $300. (I’ll get you guys a video, Uvic engineering project)

I have to long a run to my house battery for my wallas stove/heater fan so want something robust for it to run throughout the night and still allow the boat to start in the morning. I’d have gone lithium but a good starting one is pricy https://dakotalithium.com/product/d..._dglKB-56nV3vqTyymQARHv1FpEHp2CBoC6UoQAvD_BwE

And they can charge up to 5 times faster. I have AGM house batteries and they come back up to 100% really quick
Just need to make sure your charger is set for AGM

 

[kaelc]

And they can charge up to 5 times faster. I have AGM house batteries and they come back up to 100% really quick
Just need to make sure your charger is set for AGM

Yeah went for a Victron charger for both shore power and solar when I replaced a bunch of wiring and add a extra bus bar. Still have to install the solar. Trying to get everything up to close to your level but by then you’ll have switch to lithium!

 

[TheHurtLocker]

Out of the slip. Good power spray on the bottom. Put her in winter home. Winterize and a couple of small projects over the next month. Ordered all new rocker switch covers from New Wire, they should be here in a couple of days.

 

[barkerfam]

Out of the slip. Good power spray on the bottom. Put her in winter home. Winterize and a couple of small projects over the next month. Ordered all new rocker switch covers from New Wire, they should be here in a couple of days.

Let us know how that goes. It's on my list for my 2870 as well. thx

hb

 

[Pewpster]

Replaced the trim pump motor. Two broken bolts and clipped my hand with a sledge. It wasn't a fun time, but it's done and it works.

 

[chille51]

Not to the boat but to the truck to tow the boat - did a 2 Low mod yesterday. Since I have to back the boat up a pretty steep driveway, with a couple turns in the process, I can now flip a switch in the truck and override the automatic engagement of my front hubs. So I can use the low gearing of 4 low, without worrying about binding up the steering on dry pavement, and put less strain on the transmission. Haven't actually moved the boat with it yet but tested it out. My neighbours probably thought I lost it, backing up and down my driveway for no visible reason.

 

[noluck]

Not to the boat but to the truck to tow the boat - did a 2 Low mod yesterday. Since I have to back the boat up a pretty steep driveway, with a couple turns in the process, I can now flip a switch in the truck and override the automatic engagement of my front hubs. So I can use the low gearing of 4 low, without worrying about binding up the steering on dry pavement, and put less strain on the transmission. Haven't actually moved the boat with it yet but tested it out. My neighbours probably thought I lost it, backing up and down my driveway for no visible reason.

i have installer a bunch of them back in the day always the pacbrake kit in the second gen dodge

 

[Rayvon]

Found out today that my old tank in my project Searay isn't worth repairing ,so it's getting a new one.Something for anyone to consider when thinking of restoring or podding an older boat is the rising costs of everything . Better to pay more for a boat that is all done,if you can find one used.

 

[pescador]

Found out today that my old tank in my project Searay isn't worth repairing ,so it's getting a new one.Something for anyone to consider when thinking of restoring or podding an older boat is the rising costs of everything . Better to pay more for a boat that is all done,if you can find one used.

Are you going to build the new one out of alloy? I assume. I’m looking at Pursuits to replace my Grady but most need tanks replaced I’ve read. Any idea on cost?

 

[Rayvon]

It will be 3/16 aluminum,will outlast my or a younger persons lifetime I'm told.It will run in the $1400-$1800 range.Plus I'll replace the filler fitting,fuel and vent hoses.No labour cuz I don't get paid.My Grady has a plastic/composite tank,maybe newer Pursuits do too.

 

[TheHurtLocker]

Let us know how that goes. It's on my list for my 2870 as well. thx

hb

Here ya go! New Wire was great to deal with. My only gripe with the 2870 is where they mount the accessory switches, under the helm by your knees. Really hard to see and operate when running, especially when dark or nautical. New covers have pics and larger labels to see a lot better.

 

[seabeyond]

Are you going to build the new one out of alloy? I assume. I’m looking at Pursuits to replace my Grady but most need tanks replaced I’ve read. Any idea on cost?

The big pita with many of the pursuits is they don't leave access to the tank. Some do, especially the older pursuits but man there's lots of big bills for a vintage of 2870. That's a very expensive repair. The tank is the cheapest part on those.

 

[barkerfam]

thank you @TheHurtLocker . Looks really nice!

HB

 

[Rayvon]

Installed the new tank in my project boat today,I'll put the cover on tomorrow and start moving forward again.

 

[seabeyond]

Installed the new tank in my project boat today,I'll put the cover on tomorrow and start moving forward again.
View attachment 99649View attachment 99650

Looks great Ray. Is this a 240srv? I can't remember which model you bought.