Volvo Penta DPS-A Drive, F3 and F5 Props & 320Xi Manifolds( barr)

[ab1752]

Other than the long block I have all Volvo Penta 320GXI parts from my outgoing power package available after the week of Oct 10th. The boat is currently in the water in Deep Cove (North Vancouver) if one wants to test the drive out before Sunday Oct 5th as that is when the last run will occur back to Lions Gate Marina and the equipment will be removed starting October 7th.

The long block has already been sold.

- DPS-A drive 1.78 gear ratio and transom shield including lift arms. - $5,000.00 - Drive was installed in 2016 by Pleasure Craft Marine in North Vancouver. It has been serviced by PCM annually and painted with antifoulant paint by Watertight. It has about 800 hours and shifts perfectly, with bellows and new gimbal bearing in 2024 by PCM.

- Set of F3 stainless props - $850.00

- Set of F5 stainless props - $850.00

- Volvo Penta 320GXI Intake manifold and new throttle body injectors and gaskets for throttle body - $350.00

- Brand new set of Barr manifolds and risers (OMC-20-913784 / OMC1-914035) – $1,500.00 - These were installed on the boat which is receiving my long block. His original set failed, and hydro locked his motor. These were installed first, then it was clear his motor was destroyed so they are going to retain my manifolds and risers which were new from VP in spring 2025. Receipt for $2200 is available, but warranty likely would not survive this resale.

There will be some other items such as steering, trim pump, wiring harness, fuel pumps (new high pressure pump last season), brand new in box VP high pressure fuel pump, Duo Prop removal tool, heat exchanger and anything else that survives the removal by PCM so if you need something not noted above, please let me know. Best to assume all belt driven accessories are likely to remain with the long block.

 

[salmonkiller01]

Got to ask if your doing a ob conversion?

 

[Pineapple Express]

Got to ask if your doing a ob conversion?

I think he's upgrading to twin Volvo diesels...you know...for fuel cost savings and redundancy!

 

[ab1752]

Conversion to sails.

 

[ab1752]

All this stuff is off now, came off clean. Ill get pics and an inventory of whats available next week.

Come on boys, dont make me join book face, all prices are obo and im very flexible as I dont want to have to store this stuff around the house and endure the never blah blah.

 

[ab1752]

Quick update: F3 and F5 props, and the IO drive are still available so make me an offer, I want this stuff sold. All other parts are gone.

Pics of manifolds, now that I get to trip over these daily as the pile in my garage grows, come and get the set for $1250 complete. To confirm., never ran as his engine was blown. Interesting the bit of surface rust, i think i would spray these with hotrod paint and maybe rust converter first.

These came off as a set with the risers still installed. Buyer should make sure to have lots of friends if they want to try and install these complete as they are not light! Rubber bellows from riser to exhaust included.