stillmissin
New Member
2013 etec trim and till not going up or down. when i puh switch i can feel it in the relay does this mean my relay is bad. can anyone help me
trim and tilt
- Thread starter stillmissin
- Start date
ship happens
Crew Member
Might wanna delete your other post.
If you can feel the relay click then great. Rules out your switch. The relay may not be outputting, or the motor is done. Now you need to rule out whether it's the relay or the motor. Disconnect the motor wires from the relay pack. Blue and green 10awg wires in a black connector. Easiest way is to manually give power and ground to the motor wires.
Positive to blue it goes up. Positive to green it goes down. The sky is blue and the ground is green
If you can feel the relay click then great. Rules out your switch. The relay may not be outputting, or the motor is done. Now you need to rule out whether it's the relay or the motor. Disconnect the motor wires from the relay pack. Blue and green 10awg wires in a black connector. Easiest way is to manually give power and ground to the motor wires.
Positive to blue it goes up. Positive to green it goes down. The sky is blue and the ground is green
Last edited:
