Rod storage ideas in cuddy

Trophy 2000

Trophy 2000

Member
Need recommendations for inside the cuddy for rod storage racks on the sides and on the roof . I have way too many rods on the boat Lol .
 
Trophy 2000 said:
Need recommendations for inside the cuddy for rod storage racks on the sides and on the roof . I have way too many rods on the boat Lol .
Click to expand...
Me too! I bought a a rack similar to this that I plan to use tucked up as high as possible along the side...though it involves bolting through the hull and I haven't yet done that. I've haven't come up with anything better as of yet, aside from rod socks to at least keep tangles down and give some protection.
1675486707024.png
 
the force said:
Me too! I bought a a rack similar to this that I plan to use tucked up as high as possible along the side...though it involves bolting through the hull and I haven't yet done that. I've haven't come up with anything better as of yet, aside from rod socks to at least keep tangles down and give some protection.
View attachment 89282
Click to expand...
I found this and Taco Marine makes another that is crazy expensive https://www.amazon.ca/TACO-Metals-4...3d-250c883d2899&ref_=pd_gw_ci_mcx_mr_hp_atf_m
 
the force said:
Me too! I bought a a rack similar to this that I plan to use tucked up as high as possible along the side...though it involves bolting through the hull and I haven't yet done that. I've haven't come up with anything better as of yet, aside from rod socks to at least keep tangles down and give some protection.
View attachment 89282
Click to expand...
They make locking ones. Way better.
 
the force said:
Nice share, I hadn't seen those ones. I wonder if you can realistically fit 4 rods with ocean sized reels? Or perhaps the ability to offset the reels (end for end) would be better?

Not crazy about the Taco ones, especially the price
Click to expand...
They barely fit a mooching reel. But you're right, depending on the butt length, you could offset them.
 
starboard, drill press and router and build your own, i built ones in the glasply i had but could not find the pictures
 
mgreen5228 said:
After several other purchased and home made my favorite is wood rails, wire management for velcro by Panduit.Pandit. no rattle. Holds any rod. I will be doing this again.
Click to expand...
Nice one! Good call on the Velcro, can be any size , quiet and soft in the rods. Build to whatever size you want. I’ll likely borrow this idea.
 
in the day and age of some amazing adhesives... don't know why a person wouldn't bond wood or other material to mount onto. NO bolting threw risking potential leaks. Also for the glass guys what about glassing in a small board to screw rod racks onto? Just thoughts off the top of my head this morning.
 
bcbassfishing said:
in the day and age of some amazing adhesives... don't know why a person wouldn't bond wood or other material to mount onto. NO bolting threw risking potential leaks. Also for the glass guys what about glassing in a small board to screw rod racks onto? Just thoughts off the top of my head this morning.
Click to expand...
What sort of adhesive would be best for a carpeted liner?
 
 
Last edited:
You must log in or register to reply here.

Similar threads

PEETZcanada
My personal favorite rod on a downrigger...
Replies
16
Views
1K
Dogbreath
Dogbreath
J
Coombs Parksville boat storage
Replies
3
Views
688
Jonnywwdb
J
Chummer
Winter fishing bachelor party
Replies
21
Views
2K
Gong Show
Gong Show
Olde School
Storage questions
Replies
4
Views
549
N2013
N2013
wildthing
Gunnel mounted rod holders HOT TIP ...!!!!!
Replies
0
Views
461
wildthing
wildthing
Back
Top