Replacing original hooks on spoons

Daveroo

Active Member
I did maintenance today of my gear after a couple of weekends of fishing and having some breakage and failures. One of my items to do was replace the original hooks on some spoons. This is a Gibbs Cop Car after only one fish being hooked on it. I would like to say this was due to a tyee size monster, but in reality this was caused by a free hanging 10 pound spring. Don't ask me why the fish was hanging free, it's a bit of a story. The bottom line is that the original hooks on these spoons are crap and I am going through my gear replacing them with Siwash Gammies. I also have a couple of 4" spoons from Amundson. I've never used these spoons before. Should I replace the original hooks on those too?
Gibbs Bent Hook.jpg
 
I haven’t had an Amundson hook bend, but I also haven’t fished them as much as a Skinny G. The Skinny G hooks are cheese grade garbage, however.
 
I did maintenance today of my gear after a couple of weekends of fishing and having some breakage and failures. One of my items to do was replace the original hooks on some spoons. This is a Gibbs Cop Car after only one fish being hooked on it. I would like to say this was due to a tyee size monster, but in reality this was caused by a free hanging 10 pound spring. Don't ask me why the fish was hanging free, it's a bit of a story. The bottom line is that the original hooks on these spoons are crap and I am going through my gear replacing them with Siwash Gammies. I also have a couple of 4" spoons from Amundson. I've never used these spoons before. Should I replace the original hooks on those too?
View attachment 98102
Those skinny g hooks are total garbage . I would never put one down without replacing the hook.leaned the hard way
 
I think the Amundson is a step up but still cheap.

I’d swap any spoon that’s not an AP or west coast tackle spoon with a gammie, owner or mustad siwash. Cheap insurance!
Ive had a few AP spoon hooks fail. this summer I had the eye break on one and found it in the boat after washing the spoon for a couple hours, wondering why I wasnt getting hit but my dad was. a few years ago i had the point break off another one, again no hookups for awhile.
 
Ive had a few AP spoon hooks fail. this summer I had the eye break on one and found it in the boat after washing the spoon for a couple hours, wondering why I wasnt getting hit but my dad was. a few years ago i had the point break off another one, again no hookups for awhile.
Had the point break off one on a hog on Sunday.
 
I have never had a hook on a AP fail, they look to be quite nice, but I did have a issue with a split ring straighting out. I would think I was seconds from losing a nice fish and my spoon. The ring was straight with a bit of hook on each end, came detached from the spoon in the net. As far as hooks I use the Mustad open eye Siwash on all spoons except my AP's
 
I strictly fish Amundson skinny g knock off spoons in Barkley Sound in June, July and into about the 3rd week of August. I have never had to swap out their hooks, I have never had one of their hooks bend. I switched to Amundson cause I was tired of having to switch all the hooks out on Gibb's skinng gs. Very happy with their 3.25 and 4.00 skinny g knock off spoons. Highly recommend them.
Just my two cents worth...
 
I have had a few Amundson and gibbs hooks break around the eye. Haven't had one bend yet. Usually the thin spoon gets pretzelled in the net or the paint is coming off before I have hook issues.
 
I replace all with 3/0 or 4/0 Mustad stainless commercial style hooks. Not a fan of rusty hooks. Unfortunately these far outlast the crappy spoons.
I have a fresh water dunk tank for all my gear which gets used lots when switching up to find what works. When I dry them out post trip, the stainless hooks are a pleasure to see amongst the rusting steel hooks.
 
IMG_0292.jpeg
My new No Bananas. Ironically looks like one after a Coho hit it this morning. I did change the hook Lol.
 
Back
Top