Help With Wiring Airmar B744 10 Pin to Garmin 8 Pin Block

[rovingfisherman]

Hi, I know there are some guys on here that really know there stuff when it comes to wiring and compatibility.

My buddy is looking for some help on wiring an Airmar B744 Furuno 10 Pin Transducer to a Garmin 8 Pin Block. Any help
or suggestions would be greatly appreciated.

Thanks

 

[Aquaholic]

I joined this page for answers and interest. One of the mods does lots of YouTube videos on Garmin.

 

[kaelc]

I think I have the cable he needs in Victoria. I might have listed it here a couple of years ago when my Garmin died.

 

[kaelc]

Nope wrong pins apparently https://www.sportfishingbc.com/foru...mar-to-garmin-transducer-cable-25-foot.84558/

 

[rovingfisherman]

Nope wrong pins apparently https://www.sportfishingbc.com/foru...mar-to-garmin-transducer-cable-25-foot.84558/

Thanks for checking.

 

[rovingfisherman]

I joined this page for answers and interest. One of the mods does lots of YouTube videos on Garmin.


View attachment 79162

Thanks, hopefully he'll see the post and have a suggestion.

 

[Aquaholic]

Thanks, hopefully he'll see the post and have a suggestion.

Did you join the FB page and ask your question?

 

[wildthing]

tip you'll need the tech spec for the furuno from airmar along with garmin one that way you will find out if it doable
i have done quite a few bear wire garmin and lowrance but before chopping off the plugs see if there is a mix and match cable available