Sandpiper
Active Member
I would like to post these parts for sale in the forum while I strip the boat for a pod and an outboard engine. The boat is a 20 foot double eagle hardtop and the engine is a 1996 302 Volvo Penta EFI with a raw water pump. The manifolds, bellows and risers are under a year old and it runs fine but it has low compression in one cylinder as we suspect the boat was overheated by the previous owner, The flappers in the exhaust were found to be melted during my ownership.
The leg is in good working order and it comes with an aluminum prop and everything from the transom shield back it is a 1996 VOLVO sx leg that was said to be rebuilt by the P/O but i cannot confirm that. Mike at Westshore marine had the leg off to change the coupler on the engine when we removed the flappers over the summer.
Total hours on this setup : 1300 hours.
I have been cruising craigslist and I have a few numbers in mind but I trust the answers here will be able to get me close to a fair price for the package or as 2 pieces.
Dan
The leg is in good working order and it comes with an aluminum prop and everything from the transom shield back it is a 1996 VOLVO sx leg that was said to be rebuilt by the P/O but i cannot confirm that. Mike at Westshore marine had the leg off to change the coupler on the engine when we removed the flappers over the summer.
Total hours on this setup : 1300 hours.
I have been cruising craigslist and I have a few numbers in mind but I trust the answers here will be able to get me close to a fair price for the package or as 2 pieces.
Dan
