Good News/Service From Harbour Chandler re: UV Tape

Dogbreath

Dogbreath

Well-Known Member
The success of flashers & spoons covered in UV tape means it's tough/expensive product to source in Canada that's why I was so happy to get an email from HC saying they'd found a supplier as linked.

And FWIW you don't need a fancy pants new $20+ flasher to Go UV-all you have to do is strip off the old tape and apply the new stuff nothing easier.

harbourchandler.ca

WTP Flasher Tape 3x12 | Reflective Lure Tape for Fishing

Customize flashers and lures with WTP Flasher Tape. Reflective 3" x 12" lure tape designed to add colour and visibility to trolling and fishing setups.
harbourchandler.ca harbourchandler.ca
 
Dogbreath said:
The success of flashers & spoons covered in UV tape means it's tough/expensive product to source in Canada that's why I was so happy to get an email from HC saying they'd found a supplier as linked.

And FWIW you don't need a fancy pants new $20+ flasher to Go UV-all you have to do is strip off the old tape and apply the new stuff nothing easier.

harbourchandler.ca

WTP Flasher Tape 3x12 | Reflective Lure Tape for Fishing

Customize flashers and lures with WTP Flasher Tape. Reflective 3" x 12" lure tape designed to add colour and visibility to trolling and fishing setups.
harbourchandler.ca harbourchandler.ca
Click to expand...
I want the 602 pattern.

What do you use to remove that glue once the tape is off? It’s oil proof as I’ve tried everything except acetone to remove it. Would it need that type of cleaner to get the old gunk off once the current sticker is off there?
 
I think Acetone would dissolve the old flasher-I either just rub it off with my fingers or leave it; my experience is once the new tape is on the old adhesive isn't an issue.
 
Dogbreath said:
I think Acetone would dissolve the old flasher-I either just rub it off with my fingers or leave it; my experience is once the new tape is on the old adhesive isn't an issue.
Click to expand...
Not sure if there’s a difference, but it’s the commercial troller grade flashers from PNT. There is no way that glue is rubbing off with the fingers. It’s welded by God.
 
BC Coast Pilot said:

Goof Off Pro Strength Liquid Adhesive Remover 6 oz Mfr# FG661 - Ace Hardware

Professional Strength on job sites, in garages, in the workshop and the workplace, painting and contracting professionals need powerful solutions to clean and remove the toughest spots, stains and messy mistakes. That's why they count on Pro Strength Goof Off. It removes the Toughest Stuff from...
www.acehardware.com www.acehardware.com
Click to expand...
that was my next attempt, vs. buying a container of acetone or similar toxic remover.
 
TMan said:
WD40 is good on some adhesives.
Click to expand...
true, but it depends on the base of the adhesive. If WD40 worked, if you dropped a flasher in your bilge, the stickers would start to fall off. Like cleaning paintbrushes with oil based paint, vs paintbrushes with water based paint. Knowing the base ingredient is helpful.
 
Just got back from PN&T in Steveston I see they've got the 'good stuff' in stock-3'' wide and however long for $3 something a foot.
 
I just bought 40 flashers for $100. This is a great way to get new life out of ones I might not fish
 

Attachments

  • IMG_0197.jpeg
    IMG_0197.jpeg
    506.7 KB · Views: 45
Re-reading this I realise I forgot to actually buy some of what I was admiring so I guess I'll be back out there this week sometime.
 
I struggle to keep it stuck on, gave a clean before installing too
 
Last edited:
Old Blue said:
My buddy uses a bit of sand paper to add texture to the flasher before applying. I'd imagine a hair dryer to warm it up first too might help.
Click to expand...
Thanks. I was probably in too much of a hurry when I resurfaced a few
 
You must log in or register to reply here.
Back
Top