Entering latt and long to map in closure areas on HDS

[fishin solo]

Hi guys
I’m definitely technology challenged lol. I’m trying to figure out how entering latt and long coordinates to draw a closure area as per DFO latt and long coordinates. Any help much appreciated. I know how to enter etc but how do I link them together ?
Cheers
Chuck

 

[pacemaker]

If you mark each waypoint as #1, #2, #3 etc, and then make a “route” for each area that you want to delineate, a line will show on your screen.. So make a route from waypoint 1 to waypoint 2 to waypoint 3 etc, and your lines will be visible.. Everything on one side of the line will be safe, and the other side will be the “no go” zone. It may not be the “Hi-Tech” way of doing things, but it works very well for me with my HDS units... Good luck with it..

 

[fishin solo]

If you mark each waypoint as #1, #2, #3 etc, and then make a “route” for each area that you want to delineate, a line will show on your screen.. So make a route from waypoint 1 to waypoint 2 to waypoint 3 etc, and your lines will be visible.. Everything on one side of the line will be safe, and the other side will be the “no go” zone. Works very well for me with my HDS units... Good luck with it..

Thanks

 

[32Knots]

There is a download map you can do. A fishing charter from port or ucluelet did it. I'll try and find it.

Heres a sample screenshot

 

[Sir Reel]

My Garmin G3 charts show the rockfish and sponge reef closures on my maps.

 

[fishin solo]

My chart shows all the rcas but not sponge reefs