custom hydraulic hoses in canada?

[jcon12]

Hey guys,

I am adding a second station and require some custom length hydraulic hoses.

Anyone know of any companies in Canada which offer this service?

Thanks!

 

[MikePA]

Hey guys,

I am adding a second station and require some custom length hydraulic hoses.

Anyone know of any companies in Canada which offer this service?

Thanks!

Hose, Tubing, Ducting

Hose, Tubing, Ducting

www.new-line.com

These guys are in Nanaimo and are excellent to deal with.

 

[ship happens]

There are a ton of places who make custom hydraulic hoses. However if your referring to second station with steering on your boat, you will end up with steel 45 degree flare or NPT end fittings and will be much different then the style seastar uses. Just keep that in mind

 

[kingblazer84]

Alan’s hose and all in Kelowna

 

[jcon12]

@ship happens I plan to use the 45 degree orb fittings at the helms and then run lines from both steering stations to a 3/8" T fitting. From the T fitting i would run the two lines to the motor.

I would also have the one line connecting the two helms which is 1/4 NPT.

 

[ship happens]

@ship happens I plan to use the 45 degree orb fittings at the helms and then run lines from both steering stations to a 3/8" T fitting. From the T fitting i would run the two lines to the motor.

I would also have the one line connecting the two helms which is 1/4 NPT.

View attachment 115917

There's a much simpler and cost effective, labour saving way of doing this.

Put run-tees into the back of both pressure sides of the helm, and one orb fitting for the return. Run 3 hose from one helm to the next helm. Done. Use seastar hoses. Much easier and cost effective.

 

[Bearded wonder]

I believe Gregg’s Distribution does.