A-a-Ron
Well-Known Member
I have a 16x19P ENERTIA ECO (RH) prop that I would be willing to swap for an ECO 17P (or possibly 18P)
Long story short, I should have trusted my gut and gone with the 17.
I’m just barely hitting my WOT range and I can tell it’s a bit sluggish lower-mid range RPM’s, so I’m overpropped. At 3700 RPM the motor is barely revving, I’m going 30 knots and RPM is fluctuating (symptom of lugging/over propping) After 4000 RPM it sounds like it wants to sound, but we’re at 33kn +. Ok if it’s calm but in rough water I’m too low RPM. Max rpm is 5350, barely in range (5200-6000 for my motor)
My regular Enertia 19P hit the WOT perfect but was looking for just a bit more hole shot and fuel efficiency. The more I research now clearly an ECO 17P or even 18P was a better choice.
My ECO 19P has been used approx 50 hours and it hasn’t been dinged at all. Anyone got a 17 or 18P?
Long story short, I should have trusted my gut and gone with the 17.
I’m just barely hitting my WOT range and I can tell it’s a bit sluggish lower-mid range RPM’s, so I’m overpropped. At 3700 RPM the motor is barely revving, I’m going 30 knots and RPM is fluctuating (symptom of lugging/over propping) After 4000 RPM it sounds like it wants to sound, but we’re at 33kn +. Ok if it’s calm but in rough water I’m too low RPM. Max rpm is 5350, barely in range (5200-6000 for my motor)
My regular Enertia 19P hit the WOT perfect but was looking for just a bit more hole shot and fuel efficiency. The more I research now clearly an ECO 17P or even 18P was a better choice.
My ECO 19P has been used approx 50 hours and it hasn’t been dinged at all. Anyone got a 17 or 18P?
Last edited:
