Wheelerboy
New Member
I wanna foam the air cahmber in my double eagle. I picked up my Buddys dads old boat at the end of last winter. It is a old 15.9 (not sure of the year because deagle only usen cereal # before 79) it's got a 150 black max oiler and goes like stink. In was under cover since 93 and wasent used past 97 so the floors are still pretty good. My problem is I get water in the air compartment and a couple
pieces of 2x2 wood have appeared in there(floor/seat supports?) so I want to cut a hole for a ski locker between the seats and a hole for a battey box in the bow and use those holes and the little
hatch at rear of the deck to fill the boat with expanded foam then glass the floor and re gel coat the exterior of the hull and hopefully get another ten years out of her. I would like to know if anybody knows the stringer/bulkhead system for this boat. Does it go all the way to the front? Is there foam on the sides? Are there cross supports or do they run from front to back. Any one had the deck off these boats? Any other sugestions? Thanks
by the way the ski locker and battery boxes are for a electric motor that will be independant of the boats electrical so the locker won't be that big
pieces of 2x2 wood have appeared in there(floor/seat supports?) so I want to cut a hole for a ski locker between the seats and a hole for a battey box in the bow and use those holes and the little
hatch at rear of the deck to fill the boat with expanded foam then glass the floor and re gel coat the exterior of the hull and hopefully get another ten years out of her. I would like to know if anybody knows the stringer/bulkhead system for this boat. Does it go all the way to the front? Is there foam on the sides? Are there cross supports or do they run from front to back. Any one had the deck off these boats? Any other sugestions? Thanks
by the way the ski locker and battery boxes are for a electric motor that will be independant of the boats electrical so the locker won't be that big