fish brain
Crew Member
My 8 hp Yamaha 4 stroke has no water at the tell tale. I have replaced the impeller and thermostat and checked them twice to make sure I didnt make a mistake installing them. I have run the motor with the thermostat removed. Still no water.
If i blow in the holes the air goes some where, but not out the tell tale. exhaust does however come out, so I'm thinking it's not plugged.
The leg engages gear and spins the prop, the keyway on the impeller is in place and solid.
Any ideas?
The motor was working fine and pissing up a storm one day and not the next. I'm stumped.
If i blow in the holes the air goes some where, but not out the tell tale. exhaust does however come out, so I'm thinking it's not plugged.
The leg engages gear and spins the prop, the keyway on the impeller is in place and solid.
Any ideas?
The motor was working fine and pissing up a storm one day and not the next. I'm stumped.