2008 ez load trailer

[Linda]

I have to do the bearing. And all the information these are not the original bears. I have a straight spindle . Don't know if the bears init are correct. L44649.
Ez load is 300-020885 on their website

 

[noluck]

I have to do the bearing. And all the information these are not the original bears. I have a straight spindle . Don't know if the bears init are correct. L44649.
Ez load is 300-020885 on their website

bearing size is according to the gvw of the axle

 

[23Hourston]

Ez load 300-020885 Is for the kit
L44649 is for the individual bearing

 

[Dantankerous]

What is the issue? I have a Highliner trailer and required a special off the shelf speedi sleeve that I had to get from Highliner.

 

[RELIC]

I have to do the bearing. And all the information these are not the original bears. I have a straight spindle . Don't know if the bears init are correct. L44649.
Ez load is 300-020885 on their website

Get a cheap set of Vernier calipers and measure your axle and hub dimensions when you get it all apart so you can confirm you are getting the right size bearing and races.
Typical 2000 lb axle bearing and races are:
Double Lip Grease Seal-10-60 1.987 O.D 1.5 I.D
Inner Bearing-L44649 1.063 I.D
Outer Bearing-L44649 1.063 I.D
Inner Race-L44610 1.980 O.D.
Outer Race-L44610 1.980 O.D.

 

[Newf]

What is the issue? I have a Highliner trailer and required a special off the shelf speedi sleeve that I had to get from Highliner.View attachment 115102

I have a 2014 single axle Ez Loader trailer. It has a stainless sleeve where the seal sits. Helps prevent corrosion/ wear that results in damage to the seal. Have not had to replace yet. Is the one shown under the seal or a bearing?